Owner`s manual

37
Basic connections and settings
Direct monitor soft control switch
Turn this on if you want to control input monitoring from ASIO 2.0 compatible
software.
Direct monitor volume
This adjusts the balance between the monitor volume and the audio playback
volume from your computer. Adjusting the direct monitor volume will not
affect the recording level.
Phantom power switch
If you’re using a condenser mic, turn the phantom power switch on.
* If a device that does not use phantom power is connected, you must turn off the
phantom power switch. Failing to do so may cause malfunction.
Input sensitivity knob
Use the input sensitivity knob to adjust the input level. For the best audio
quality, raise the level until it is as high as you can get it without causing the
input level indicator to light in red.
Other notes
Don’t connect anything to jacks you are not using.
Howling could be produced depending on the location of microphones relative
to speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
FA-66_e.book 37 ページ ２００６年１月１２日 木曜日 午前１１時３２分