Owner`s manual

31
Installing the driver (Windows)
WDM
Use this if you are using the FA-66 with the following applications or situations.
• Conventional applications such as Media Player
(for the settings, refer to “Input/output device settings” (p. 32))
• WDM driver mode compatible applications such as SONAR
• DirectSound compatible applications
ASIO
Use this if you are using the FA-66 with an ASIO-compatible application such
as Cubase. In the ASIO settings of your application, choose “EDIROL FA-66.”
You will be able to use ten inputs and ten outputs.
* When using the FA-66 with ASIO, we recommend that you not set your application
to use the Microsoft GS Wavetable SW Synth. (This will decrease the processing
load, and make it easier to change the driver buffer size.)
How WDM ports correspond to FA-66 output jacks
If you have turned on software monitoring in your application,
turn the FA-66’s hardware monitoring (direct monitor) off to
prevent double monitoring and to keep an audio feedback loop
from occurring.
WDM output port
FA-66 output
jacks
WDM input port
FA-66 input
jacks
EDIROL FA-66 OUT 1
L
R
OUTPUT jack 1
OUTPUT jack 2
EDIROL FA-66 IN 1
L
R
INPUT jack 1
INPUT jack 2
EDIROL FA-66 OUT 2
L
R
OUTPUT jack 3
OUTPUT jack 4
EDIROL FA-66 IN 2
L
R
INPUT jack 3
INPUT jack 4
EDIROL FA-66 OUT 3
* This port is not dis-
played when operat-
ing at 192 kHz.
Digital output
connector
EDIROL FA-66 IN 3
* This port is not dis-
played when operat-
ing at 192 kHz.
Digital input
connector
FA-66_e.book 31 ページ ２００６年１月１２日 木曜日 午前１１時３２分