Owner`s manual

Before you begin using the FA-66 with your Macintosh (Mac OS X users)

* Depending on the model of Macintosh you are using, starting

up the Macintosh when the FA-66 is connected may cause

operation to become unstable. In this case, start up the

Macintosh and then connect the FA-66.

* If you want to change the FA-66’s sample rate, turn the FA-66

off, change the sample rate, and then turn the FA-66 on again.

If, in the Mac OS System Preferences - Sound - Output, the

EDIROL FA-66 is not shown in the “Choose a device for

sound output” setting, this means that the FA-66 is

completely powered down.

FA-66_e.book 20 ページ２００６年１月１２日　木曜日　午前１１時３２分