Owner`s manual

19
Before you begin using the FA-66 with your Macintosh (Mac OS X users)
If you want to use the FA-66 with the iTunes software
included with your Macintosh, specify the input/output
devices as follows.
The procedure for making device settings differs
depending on the software you are using. For details, refer
to the owner’s manual for your software.
1
From the Apple menu, choose the System Preferences
dialog box, and click Sound .
2
Click the Sound Effects tab, and choose EDIROL FA-66
for the “Play alerts and sound effects through” setting.
3
Click the Output tab, and choose EDIROL FA-66 for the
“Choose a device for sound output” setting.
4
If the Input tab is shown, choose EDIROL FA-66 for the
“Choose a device for sound output” setting.
Audio and MIDI settings
Audio settings
If you want sound to be played
from the internal speakers of
your Macintosh, choose
“Internal speakers” in the
Output tab. If you don’t want
alerts to be played through the
FA-66, choose “Internal
speakers” for the “Play alerts
and sound effects through”
setting.
Cautions for use
Before you use your software with the FA-66, please note the following.
• Before you start up your software, use a FireWire (IEEE 1394) cable to
connect the FA-66 with your computer, and turn on the power.
• Do not disconnect the FA-66’s FireWire (IEEE 1394) cable or switch off the
power to the FA-66 while your software is running.
• Close your software before you switch off the FA-66’s power.
• Turn off the Sleep setting of your Macintosh.
• The FA-66 will not work in the Classic environment of Mac OS X. Use it
when the Classic environment is not running.
• Turn off the energy conservation settings of your Macintosh.
• If the Options pane of the Energy Saver preferences on your Macintosh
has a Processor Performance setting, choose the “Highest” setting.
FA-66_e.book 19 ページ ２００６年１月１２日 木曜日 午前１１時３２分