User's Manual

°
Various Settings (Function Mode)
Function settings
Display Value Explanation
F01
F
(Fixed),
L2
(Super Light),
L1
(Light),
N
(Medium),
H1
(Heavy),
H2
(Super Heavy)
Adjusting the Keyboard Sensitivity (Key Touch)
Here’s how to change the way in which the sound responds to your keyboard dynamics. You can adjust the response as appropriate for
your playing strength.
F02
1
(Pair),
2
(Separate)
Changing the Way in Which the Sound Is Heard (Twin Piano Mode)
This setting species how the sound will be heard when Twin Piano is on.
F03
Off
,
On
Dividing the Keyboard for Two-Person Performance (Twin Piano)
This setting turns Twin Piano on/o.
F04
1
(Keyboard & Song),
2
(Keyboard),
3
(Song)
Specifying What the Transpose Will Aect (Transpose Mode)
This setting species what the transpose will aect. You can use the transpose to change the pitch of both the song and the keyboard,
only the pitch of the song, or only the pitch of the keyboard.
F05
-6
–
0
–
5
[semitone]
Transposing the Keyboard or Song (Transpose)
Here you can specify the transposition value.
For example, if the song is written in E major but you want to play it using the ngering of the key of C major, you would set Transpose
to “4.”
If you play C E G 0 It will sound E G B
* If this is set to “
0
,” the Transpose function will be o.
F06
Off
,
On
Applying a Headphones 3D Ambience Eect to the Piano Sound
(Headphones 3D Ambience)
You can apply a Headphones 3D Ambience eect which produces the sensation that the sound is emanating from the piano itself even
when using headphones.
* The Headphones 3D Ambience eect applies only to piano tones; it does not apply to other tones.
On 0 Headphones 3D Ambience is on.
O 0 Headphones 3D Ambience is o .
F07
15.3
(415.3)–
40.0
(440.0)–
66.2
(466.2) [Hz]
Matching the Pitch with Other Instruments (Master Tuning)
This setting species the reference pitch for this piano (the pitch of middle A).
page
3
page
3
page
10
Basic Operation in Function Mode
1. Hold down the [Metronome] button and press the [Split]
button.
Function mode is selected.
2. Use the [-] [+] buttons to select the function that you want
to set, and press the [s] button to display the setting
screen.
3. Use the [-] [+] buttons to adjust the setting.
Press the [s] button to return to the previous screen.
4. Hold down the [Metronome] button and press the [Split]
button to exit Function mode.
Memory backup
The settings of this digital piano will return to their default state when you turn o
the power. However, you can save the settings so they will remain unchanged even
after the power has been turned o, then on again.
The settings of items marked with the “
” symbol in this operating manual can be
saved by using the Memory Backup function.
1. In Function mode, choose “
F1g
” (Memory Backup) and press
the [s] button.
11