Owner`s manual

2 TASCAM DM-3200 Ver 1.20
DM-3200 Ver1.20 Supplemental Manual
FireWire card support
By installing an IF-FW/DM FireWire interface card
(sold separately) into Slot 1 of the DM-3200 Ver1.20,
you can transfer audio data between your computer
and the DM-3200. An IF-FW/DM inserted into Slot 2
will not function.
Figure 1 is an example of the panel display when an
IF-FW/DM card is installed in Slot 1.
For more details, please refer to the IF-FW/DM docu-
mentation.
Figure 1: SLOT screen when an IF-FW/DM and an IF-SM/DM
are installed
By installing an IF-SM/DM surround monitor card
(sold separately), you can add integrated surround
monitoring to the DM-3200.
Figure 1 shows an example of the screen display when
IF-SM/DM card is inserted in Slot 2.
Surround monitor card support
Figure 2: UTILITY>SYSTEM screen
Figure 3: Name edit popup screen
Naming the mixer
DM-3200 Ver1.20 allows you to set and edit mixer
names so that you can easily differentiate between
multiple mixers with the TASCAM Mixer Companion
computer application.
1) On the UTILITY SYSTEM screen, move the cur-
sor to the
EDIT
button in the
MIXER NAME
section.
Press the
ENTER
key.
A popup window will appear for editing the mixer
name.
2) Enter a name you like.
For more information about the method for entering
names, please refer to “Naming library entries” on
page 32 of the DM-3200 Owner’s Manual.
3) Set the name by pressing the
POD2
key (STORE).
The popup window will disappear and the name you
entered will appear in the
MIXER NAME
section. Figure
4 shows an example of the screen display when the
entered name is “DM-3200.”
Figure 4: UTILITY>SYSTEM screen when the mixer is
named “DM-3200”
For more details, please refer to the owner’s manual
that comes with the IF-SM/DM card.
Note
You can cancel the entered name by pressing
the
POD3
key (CANCEL).