Specifications

10
4
Position the material so that its right edge lies over any of the grit patterns of the rightmost grit roller and its left edge
simultaneously lies over any other grit roller.
Grit roller
Material
Grit roller (Right)
Sensor
With the material set in
place, make sure the
grit rollers are
positioned correctly.
Load the material so that
it lies over the sensor on
the platen.
6 in.(approx.
152 mm)
12 in. (approx. 305 mm)
18 in. (approx. 457 mm)
24 in. (approx. 610 mm)
30 in. (approx. 762 mm)
36 in. (approx. 914 mm)
48 in. (approx. 1219 mm)
54 in. (approx. 1372 mm)
The right-hand movable pinch roller can be moved within this range.
When loading material with a width other than one indicated above,
move the right-hand movable pinch roller.
(1*) Position of the pinch roller (middle) when using material with a width of 30 in. or 36 in.
(2*) Position of the pinch roller (middle) when using material with a width of 48 in. or 54 in.
: Grit Roller
: Movable Pinch
Roller (Left)
: Movable Pinch
Roller (Right)
: Movable Pinch
Roller (Middle)
(1*)
(2*)
* Make sure the pinch rollers are positioned above the grit pattern.
54 in. (approx. 1372 mm)
Material
CX-500
Material Loading Position
Material
with a
width of 48 in.
and 54 in.
Material
with a
width of
36 in.
Material
with a
width of
30 in.
Material
with a
width of
24 in.
Material
with a
width of
12 in.
Material
with a
width of
6 in.
Material with
a width of
18 in.