Operation Manual

NederlandsPortuguêsEspañolItalianoFrançaisDeutschEnglish
Using the CUBE
11
Using the Tuner Function
CUBE are equipped with a tuner function. In addition to manual
tuning, you can also use it as a chromatic tuner.
* Use manual tuning when the strings are substantially out of tune
(such as after changing strings).
CUBE-20GX CUBE-40GX/CUBE-80GX
* The illustration shows the
CUBE-80GX
Manual Tuning
1. Press the [TUNER] button.
The unit enters the Tuner mode and the [TUNER] button lights up.
* No sound will be output from the speaker or from any of the jacks.
* The sound input to the i-CUBE LINK/AUX IN jack is output.
2. Use the TYPE switch to select the string that you want to
tune.
Knob Position String (note name)
7B
Open seventh string of a
seven-string guitar (B)
CUBE-40GX/
CUBE-80GX
only
6E
Open sixth string (semitone
down) (E )
6E Open sixth string (E)
5A Open fth string (A)
4D Open fourth string (D)
3G Open third string (G)
2B Open second string (B)
1E Open rst string (E)
A
Open fth string (semitone
down) (A
)
CUBE-40GX/
CUBE-80GX
only
A
Open fth string (whole tone
down) (G)
* The reference pitch is A = 440 Hz. This cannot be changed.
3. Play a single note on the open string that you want to
tune.
Tune the string until the green indicator lights.
Flat
Lights
red
Lights
green
Lights
red
Sharp
Pitch is
correct
* The red indicator blinks if the pitch is substantially out of tune.
4. When you have nished tuning, press the [TUNER] button
once again.
Chromatic Tuning
If you hold down the [TUNER] button for one second or longer, the
[TUNER] button blinks and the unit becomes usable as a“chromatic
tuner,” which automatically determines the name ofthe note closest
to the one played.
As with manual tuning, chromatic tuning allows you to play asingle
note on the string that you want to tune. Tune the string until the
green indicator lights.
Using i-CUBE LINK
“i-CUBE LINK” allows you to use the included mini cable (4-pole) to
connect your iPad/iPhone so that audio can be played back from
the iPad/iPhone while the sound of your guitar playing on the CUBE
is sent to the iPad/iPhone.
This function lets you use an iPad/iPhone app to record and play
back the sound of your guitar.
iPad/iPhone
app
Guitar sound
Sound will be input from the iPad/
iPhone to the CUBE.
Guitar
sound
iPad/iPhone
output
The sound of your guitar will be sent from the CUBE to the
iPad/iPhone.
* If you only want to hear the sound that’s being input from the iPad/
iPhone, turn down the [VOLUME] knob of each channel.
For details on i-CUBE LINK and on iPhone/iPad apps that can use
i-CUBE LINK, refer to Roland website.
http://www.roland.com/
Restoring the Factory Settings
Here’s how the settings stored in the CUBE can be returned to their
factory-set condition (factory reset).
1. While holding down the [LEAD] button and [SOLO]
(MEMORY) button, turn the power on.
• All indicators will blink, and the settings stored in SOLO will
return to their factory-set state.
• The CUBE will return to memory priority mode (p. 9)
(
CUBE-40GX/80GX
only
).