User`s manual

89
User's Reference
Printing heads cleaning
Interface
Instruction system
Power-saving function
Power
consumption
Acoustic
noise level
Dimensions
Weight
Environment
Accessories
Automatic cleaning and manual cleaning
Bidirectional parallel interface (compliant with IEEE 1284: nibble mode)
RD-GL III (Cutting), RD-RTL (Printing), RD-PJL
Auto-sleep
Maximum: 1.0A/100V—240V ±10% 50/60 Hz
Maximum: 0.4A/100V—240V ±10% 50/60 Hz
64dB (A) or less
40dB (A) or less
2325 mm [W] x 381 mm [D] x 428 mm [H] (91-9/16 in. [W] x 15 in. [D] x 15-7/16 in. [H])
2325 mm [W] x 736 mm [D] x 1287 mm [H] (91-9/16 in. [W] x 29 in. [D] x 50-11/16 in. [H])
85 kg (18.7 lb.)
105 kg (23.1 lb.)
Temperature: 15°C to 35°C (59°F to 95°F), Humidity: 35% to 80% (non-condensing)
Temperature: 5°C to 40°C (41°F to 104°F), Humidity: 20% to 80% (non-condensing)
Power cord: 1, Drain bottle: 1, Drain-bottle cap: 1, Screws: 2, Blade: 1, Blade Holder: 1,
Replacement blade for separating knife: 1, Cleaning kit: 1, Roland COLORCHOICE
®
CD-ROM: 1,
Roland COLORCHOICE
®
installation guide: 1, User’s manual: 1
(*) The following conditions must be satisfied:
- Material type: 3M Scotchcal Mastercut Film, ARLON Series 2100 (Media for cutting only)
- Special stand (Roll material must be loaded on the shaft)
- Side margins: 25 mm (1 in.) or more for both the left and right margins
- Front margin: 35 mm (1-1/8 in.) or more
(After loading the material, when the material type to [EDGE] with the display menu, the front margin is automatically set to 35
mm (1-1/8 in.))
- The [PREFEED] function on the display menu must be set to [ENABLE]
- Cutting of the following data one time
Origin
(1) The letters are cut in order starting with "R"
(2) After the last letter ("P") has been cut, the machine returns to the origin
point and the outer border is cut
Feed length
Sheets with a width exceeding 610 mm (24 in.): 4,000 mm (157-7/16 in.)
Sheets with a width of 610 mm (24 in.) or less : 8,000 mm (315-15/16 in.)
Cut length
Fills the
hard clip
Front margin:
35 mm (1-1/8 in.) or more
Side margins: 25 mm (1 in.) or more
Side margins:
25 mm (1 in.)
or more
Pinch roller (left)
Pinch roller (right)
Cutter protector
Printing/Cutting mode
Standby mode
Printing/Cutting mode
Standby mode
Main unit
With stand
Main unit
With stand
Power on
Power off
(According to ISO7779)