User`s manual

69
User's Reference
Acceptable material widths
90 mm to 430 mm (3.5 to 54 in.)
* However, when loading material with a width of 90 mm to 430 mm (3.5 to 17 in.), set the [EDGE SENSE] menu item to
[DISABLE].
54 in. (approx. 1371 mm)
48 in. (approx. 1219 mm)
Material with
a width
38 and 46
in.
Material with
a width
30 and 36
in.
Material with
a width
18 and 24
in.
46 in. (approx. 1168 mm)
36 in. (approx. 914 mm)
30 in. (approx. 762 mm)
(1*)
(2*)
Material
18 in. (approx. 457 mm)
54 in. (approx. 1372 mm)
Material with
a width
48 and 54
in.
170 mm
(6-11/16 in.)
24 in. (approx. 610 mm)
38 in. (approx. 965 mm)
(1*) Position of the pinch roller (middle) when using material with a width of 30, 36, 38 and 46 in.
(2*) Position of the pinch roller (middle) when using material with a width of 48 and 54 in.
*Lowering the middle pinch roller during printing may damage the printing surface. At such times, position the pinch
rollers away from above the grit rollers.
: Grit roller
: Pinch roller (left)
: Pinch roller (right)
: Pinch roller (middle)
* Make sure the left and right pinch rollers
are positioned above the grit rollers.