User`s manual

55
User's Reference
Press the [ ] key to make the following screen
appear on the display.
3
Press the [MENU] key and [ ] key to make the
following screen appear on the display.
2
Load material and install a blade, then press the
[SETUP] key.
1
4
Press the [ ] key to make the following screen
appear on the display.
Adjusting Manually
MENU
PRINT-CUT ADJ.
PRINT-CUT ADJ.
AUTO
Rear
Front
Crop mark
After printing the crop mark, the following
message appears.
5
Press the [ENTER] key to print crop marks.
6
Use the arrow keys to align the center of the blade at
the lower-right corner of the crop mark.
7
Press the [ENTER] key to adjust the printing and
cutting positions.
Crop mark
MOVE CURSOR AND
PRESS ENTER
PRINT-CUT ADJ.
MANUAL
Align with
the center
of the blade
installed on
the cutting
carriage.
Center of the blade