User`s manual

49
Maintenance
Cleaning the body
Use water or ethyl alcohol to clean, and wipe gently with a clean cloth. Wipe the operation panel and display gently with a clean, dry, and
soft cloth.
Cleaning the platen
If the platen is dirty clean with ethyl alcohol or water and wipe gently with a cloth.
Cleaning the grit rollers
Use a commercially available brush to remove dust and other detritus. Brush
horizontally while rotating the grit rollers.
Any adhering grime may prevent the material from being held in place securely.
Cleaning the pinch rollers
Use water or ethyl alcohol and clean with a soft cloth.
Cleaning the front cover
Use water or ethyl alcohol and clean with a soft cloth.
Cleaning the blade holder cap
If material debris is adhering to the inner surface of the cap for the blade holder, loosen and remove the cap, then remove the material
debris.
Never lubricate the mechanisms.
Use a small amount of water or ethyl alcohol for cleaning the covers. Never use solvents such as benzene or
thinner.
Periodically clean the platen. Attractive printing may become impossible if the platen is soiled.
Do not touch the printing heads or allow the printing heads to come in contact with anything except ink.
NOTICE
When performing cleaning, turn off the main power switch.
* Before turning off the main power, press the [POWER] key to switch off the sub power.
When the Product Needs Cleaning