User`s manual

14
Unpacking the CAMMJET
For Macintosh
Parallel interface cable (Printer cable)
Parallel connector
Secure the cable in place with the clips.
Parallel card for
Macintosh (optional)
*The tube plug and the cap for the drain bottle are required when moving the machine, so do not discard them.
1
Detach the tube plug from the tube tips protruding
from the bottom surface of the right-hand side of the
unit.
Drain bottle
3
Remove the cap for the drain bottle and attach the drain bottle to the unit by screwing
it on in the direction of the arrow. Line up the threads on the drain bottle with the
threads on the unit, and screw on the bottle without applying excessive force.
Leave this mounted unless transporting the main unit, or when it is full.
2
Pass the tube through the hole in the drain-bottle
mounting cap and align with the threaded hole.
Tighten the included screws.
Drain-bottle cap
3 Attach the Drain Bottle
Tube
Tube plug