Specifications

5
Part 1: Installation and Setup
1-2 Installing COLORIP
Installing COLORIP
PROCEDURE
1
Insert the Roland COLORIP CD-ROM in the appropriate CD-ROM drive. The setup menu appears
automatically. Click [Yes].
2
Follow the on-screen setup instructions, click [OK] to proceed. Installation finishes.
3
Start COLORIP. Click [Start] and then click [Program] - [Roland] - [Roland COLORIP].
4
From the [Language] menu, choose the suitable language for the interface language.
Connecting Printers
The computer in which COLORIP has been installed (the RIP server) connects with a printer using an ethernet cable.
You can connect them directly or via a network.
PROCEDURE
1
Click the [Configure] menu on the top of the
main screen. The [Quick Configuration] screen
appears.
2
Click on the down arrow in the [Printer Model]
window and choose the printer you're using.
3
Choose the ink you're using on your printer.
• Pigment Ink (Light Cyan, Light Magenta):
["Printer model name" Pigment LcLm]
• Pigment Ink (Orange, Green):
["Printer model name" Pigment OrGr]
• SOL INK (Light Cyan, Light Magenta):
["Printer model name" SOLINK LcLm]
4
Choose the media and the print mode that are
often used usually. You can change this setting
at any time.
(Continued on the next page.)