Specifications

28
Part 4: Contour Cutting
4
From the [Options] menu, click [Cutting] and
check the [Process Cutting Paths] or the [Out-
line Jobs] box. You can also check both boxes
at the same time.
This operation means the cutting data (the cutting queue)
is created in advance when printing.
5
Open the image file and perform RIP'ing and
printing.
Only printing is performed and the cutting data is added
in the “Cut Queue.”
6
After performing lamination or the like, reload
the media and perform the alignment on the
printer.
7
Click the [Print] menu and click the [Configura-
tion] tab. Select the printer with "Cut Only", such
as [Roland CAMMJET PRO II CJ-540 (Cut
Only)] from the [Printer Model] box. Set both
[Left Margin] and [Top Margin] to "0."
8
Click [Properties] and set up the cutting condi-
tions. Click [OK]. Click [OK] again to exit the
[print] screen.
9
From the [File] menu, click [Cutting Queue].
Double-click the job created in the step 5 and
enter "1" in the [Copies] window. Click [OK].
10
Click [OK] in the [Cutting Queue] window. Cut-
ting is performed.
4-3 Operation Using Print-and-Cut Devices