Specifications

Part 2: Getting Started

2-1 Basic Operation for Printing

This chapter shows that the basic procedures for opening an image file into COLORIP and printing it.

Step 1: Open Image Files

PROCEDURE

Click [Configure]. The [Quick configuration]

screen appears.

Choose the media and the print mode and then

click [OK].

Select [File] from the main screen and click

[Open]. Choose your file from the appropriate

folder and open it.

The image will appear in the large box that oc-

cupies the right side of the main screen.

We recommend the media and the print mode is chosen after deleting all jobs. Changing a configuration without deleting all

jobs may cause bad printing. For more information about deleting jobs, please refer to "Step 3: Deleting Jobs."