Specifications

8
Part 1: Installation and Setup
Windows NT/2000/XP
1
Insert the Roland COLORIP CD-ROM in the
appropriate CD drive. Although the setup menu
appears automatically, click [X] button to exit
the menu.
2
Windows XP:
From the [Start] menu, open [Control Panel] then click
[printers and Other Hardware]. Click [Printers and Faxes]
and click [Add a Printer].
Windows NT4.0 or 2000:
Go to the [Start] menu, click [Settings] - [Printers].
Double-click [Add Printer] icon.
3
The Add Printer Wizard will appear. Click [Next].
4
Choose [Local printer]. Click [Next].
5
On the next screen you will be asked what Port
to print to. Choose [File:]. Click [Next].
6
Click on [Have Disk] and then [BROWSE] to
the Roland COLORIP CD-ROM.
On the CD, open the "x:¥PPDs¥WinNT4" or
"x:¥PPDs¥Win2000-XP" folder.
Click on the printer.inf file and then click on [OK],
and [OK] again.
When you are using under Windows NT4.0, open the
"x:¥PPDs¥WinNT4" folder. When you are using under
Windows 2000 or XP, open the "x:¥PPDs¥Win2000-XP"
folder.
7
Choose your printer model. Click [Next].
8
Run through the next few steps of naming the
printer and printing a test page (optional) and
you will get to the screen with the button la-
beled [Finish]. When you click [Finish], Windows
will copy the files install the new printer.
You have completed the setup of a PPD on the Windows,
you can now access the printer, as you would any other
printer from any application on the Windows.
Macintosh Client
If you are using Macintosh, use the Laser Writer 8 and the like as the driver. If you specify the destination as a "File", the
PostScript file is saved.
You can find PPD files for Macintosh on the Roland COLORIP CD-ROM, in the "x:¥PPDs¥Mac" folder,.
1-3 Setting up the Client Computer