User`s manual

Chapter 1 - Getting Started

1-3 Assembling and Installing

Step 4: Remove the Protective Media

The protective media shown below is attached to this machine when it is shipped from the factory. When you have

finished installing the machine, remove all protective media.

Front

2) Peel off the tape.

4) Remove the retainer.6) Peel off the tape. 5) Peel off the tape, and

remove the packing.

3) Peel off the tape,

and remove the

packing. (Pull straight

back toward you to

extract.)

7) Attach the retainer you removed in step 4).

Rear

Retainer

1) Remove packings.

Packing

If the screw for the retainer is difficult to

loosen, use a screwdriver to remove it.