Manual

ManualsBrandsRoland ManualsCD-playersCD-2e

Table Of Contents

Owner’s Manual

without the written permission of ROLAND CORPORATION.

Roland International Web Site: http://www.Roland.com/

Before using this unit, carefully read the sections entitled: “USING THE UNIT

SAFELY” and “IMPORTANT NOTES” (Page 8–10; Page 11–13). These sections

provide important information concerning the proper operation of the unit.

Additionally, in order to feel assured that you have gained a good grasp of

every feature provided by your new unit, Owner’s Manual should be read in

its entirety. The manual should be saved and kept on hand as a convenient

reference.

Selecting English, German, French, Italian, Spanish, or Japanese as the operating language.

☞

Page 97

CD-2e_e.book 1 ページ２００７年１０月２４日　水曜日　午前１１時１６分

Summary of content (132 pages)

PAGE 1
CD-2e_e.book 1 ページ２００７年１０月２４日水曜日午前１１時１６分 Owner’s Manual Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (Page 8–10; Page 11–13). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual should be read in its entirety.
PAGE 2
CD-2e_e.book 2 ページ２００７年１０月２４日水曜日午前１１時１６分 For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
PAGE 3
CD-2e_e.book 3 ページ２００７年１０月２４日水曜日午前１１時１６分 Check the Included Items ❍ CD-2e ❍ Owner’s Manual Checking / Preparations The CD-2e includes the following items. Please take a moment to confirm that all of these items have been included with the CD-2e. If you find that any item is missing, contact the nearest authorized Roland distributor in your country.
PAGE 4
CD-2e_e.book 4 ページ２００７年１０月２４日水曜日午前１１時１６分 Table of Contents USING THE UNIT SAFELY ............................................................................. 8 Checking IMPORTANT NOTES................................................................................... 11 and Panel Descriptions ..................................................................................... 14 Preparations Media Usable for Recording ......................................................................
PAGE 5
CD-2e_e.book 5 ページ２００７年１０月２４日水曜日午前１１時１６分 Table of Contents (continued) Making a CD-R/RW Disc for Playback on Another CD Player (Finalize)... 83 Creating a CD Creating a Duplicate of an Original Music CD (Backup)........................... 84 Recording Moving a Song........................................................................................... 87 Checking / Preparations Selecting Songs from an SD Memory Card to Create a CD...................... 79 Dividing a Track ..................
PAGE 6
CD-2e_e.
PAGE 7
CD-2e_e.
PAGE 8
CD-2e_e.book 8 ページ２００７年１０月２４日水曜日午前１１時１６分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
PAGE 9
CD-2e_e.book 9 ページ２００７年１０月２４日水曜日午前１１時１６分 USING THE UNIT SAFELY (continued) 014 .................................................................................... 015 .................................................................................... 016 ● Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. ...................................................................................
PAGE 10
CD-2e_e.book 10 ページ２００７年１０月２４日水曜日午前１１時１６分 USING THE UNIT SAFELY (continued) 111: Selection ● If used improperly, batteries may explode or leak and cause damage or injury. In the interest of safety, please read and observe the following precautions (Page 22, 29). 1 2 3 5 6 ❍ Carefully follow the installation instructions for batteries, and make sure you observe the correct polarity. ❍ Avoid using new batteries together with used ones. In addition, avoid mixing different types of batteries.
PAGE 11
CD-2e_e.book 11 ページ２００７年１０月２４日水曜日午前１１時１６分 IMPORTANT NOTES 302 303a ● The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type. 304a 307 Placement 402 ● Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
PAGE 12
CD-2e_e.book 12 ページ２００７年１０月２４日水曜日午前１１時１６分 IMPORTANT NOTES (continued) Handling SD memory cards *** ● Do not remove the SD memory card while the CD-2e is powered up. Doing so may damage the data stored on the SD memory card. 704 ● Carefully insert the SD memory card all the way in—until it is firmly in place. fig.M512-Insert.eps Handling CD-R/RW Discs *** ● Don’t use unusually shaped discs, such as heart-shaped or octagonal discs. Doing so may damage the CD-2e. ● Do not bend the disc.
PAGE 13
CD-2e_e.book 13 ページ２００７年１０月２４日水曜日午前１１時１６分 IMPORTANT NOTES (continued) Copyright ● Recording, duplication, distribution, sale, lease, performance, or broadcast of copyrighted material (musical works, visual works, broadcasts, live performances, etc.) belonging to a third party in part or in whole without the permission of the copyright owner is forbidden by law. Listening 853 Deleting ● Do not use this unit for purposes that could infringe on a copyright held by a third party.
PAGE 14
CD-2e_e.book 14 ページ２００７年１０月２４日水曜日午前１１時１６分 Panel Descriptions Top Panel fig.unit01-e.eps MIC L/MIC R [VOLUME] Knob This is a stereo pair of mics built into the CD-2e. You can use these mics to record. This knob adjusts the volume of the internal speakers and the headphones. ☞ “Recording with the Internal Mics” (Page 36) ☞ “Listening to a CD/ Listening to an SD Memory Card” (Page 60) [MIC] Knob This adjusts the input level of the internal mics and the EXT MIC jack. fig.mic-peak.
PAGE 15
CD-2e_e.book 15 ページ２００７年１０月２４日水曜日午前１１時１６分 Panel Descriptions (continued) ☞ “If you are unable to eject the disc” (Page 28) ☞ “Inserting a CD” (Page 27) [EJECT( )] Button Press this to eject the CD. ☞ “Removing a CD” (Page 28) [REVERB] Button This button lets you turn reverb on or off, and adjust the reverb depth. These buttons select menu items from a menu screen.
PAGE 16
CD-2e_e.book 16 ページ２００７年１０月２４日水曜日午前１１時１６分 Panel Descriptions (continued) Display The display shows information or messages related to the operation you’re performing, such as when you’re making various settings or editing tracks. LEVEL Meter This indicates the volume level of the track that’s playing or the instrument or mic that’s being input. Source Name Indicator This indicates the name of the currently selected audio source. TRACK Indicator This indicates the track number.
PAGE 17
CD-2e_e.book 17 ページ２００７年１０月２４日水曜日午前１１時１６分 Panel Descriptions (continued) Side Panel Checking / Preparations fig.unit02-e.eps Recording Listening [MIC SELECT] Switch Connect an electronic piano, keyboard, cassette deck, etc. to these jacks. This selects the mic(s) to be used for recording. ☞ “Recording an Electronic Instrument” (Page 42), “Recording a Cassette or MD” (Page 44) EXT MIC Jacks (R jack, L/MONO jack) Switch setting Explanation INT (internal) Record using the internal mics.
PAGE 18
CD-2e_e.book 18 ページ２００７年１０月２４日水曜日午前１１時１６分 Panel Descriptions (continued) Rear Panel/ Bottom Panel fig.unit03.eps [SPEAKER] Switch Specifies whether or not sound is to be produced by the internal speakers. Switch position Explanation ON Sound will be heard from the internal speakers. OFF The internal speakers will be muted. Security Slot ( ) You can attach a commercially available security lock here. For details, refer to the following website: http://www.kensington.
PAGE 19
CD-2e_e.book 19 ページ２００７年１０月２４日水曜日午前１１時１６分 Panel Descriptions (continued) Remote Control Checking / Preparations Metronome settings Adjusting the volume Makes the metronome tempo faster. Makes the metronome tempo slower. Lower volume. Turns the metronome on/off. Listening Higher volume. Recording Performs record/playback operations for the CD or SD memory card. These have the same function as the buttons on the CD-2e itself. Playback speed settings Makes the playback faster.
PAGE 20
CD-2e_e.book 20 ページ２００７年１０月２４日水曜日午前１１時１６分 Media Usable for Recording As its recording media, the CD-2e uses SD memory cards, CD-R discs, and CD-RW discs. The functions available for editing or deleting songs (tracks) after recording will differ according to the media you use. The table below shows the functions available for each type of media.
PAGE 21
CD-2e_e.book 21 ページ２００７年１０月２４日水曜日午前１１時１６分 Turning the Power On and Off Using the Dedicated AC Adaptor 1 Recording If you’re using the dedicated AC adaptor, batteries are not required. Connect the power fig.ACadaptor-e.esp Connect the plug of the dedicated AC adaptor to the AC adaptor jack on the CD-2e’s rear panel. Plug the power cord all the way into the AC outlet. Dedicated AC Adaptor (included) To power outlet * The shape of the power cord’s plug varies depending on the country.
PAGE 22
CD-2e_e.book 22 ページ２００７年１０月２４日水曜日午前１１時１６分 Turning the Power On and Off (continued) Using Batteries Note If you’re operating the CD-2e on batteries, you won’t be able to perform CD-related operations such as recording, playing, or writing songs, etc. fig.battery06-e.esp Batteries to use AA alkaline batteries * You cannot use zinc-carbon batteries or rechargeable batteries (such as rechargeable nickel metal hydride batteries). 1 Turn the power off. Disconnect all cables from the CD-2e.
PAGE 23
CD-2e_e.book 23 ページ２００７年１０月２４日水曜日午前１１時１６分 Turning the Power On and Off (continued) Turning the power off On the CD-2e’s rear panel, set the [POWER] switch to the “OFF” position. If you’re operating the CD-2e on batteries, the battery indicator will be shown on the screen. Recording Remaining battery indicator Checking / Preparations 1 If you continue use the CD-2e when the batteries are low, the display will indicate “Battery Low,” and eventually the power will turn off. fig.icon-battery-e.
PAGE 24
CD-2e_e.book 24 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing an SD Memory Card Here’s how to prepare an SD memory card for recording. For details on recommended SD memory cards, refer to “Recommended SD Memory Card” (Page 122). Inserting an SD Memory Card 1 Insert the SD memory card into the SD card slot on the CD-2e’s side panel. fig.SDcard01-e.eps With the printed surface of the SD memory card facing upward, insert the card until it clicks into position.
PAGE 25
CD-2e_e.book 25 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing an SD Memory Card (continued) SD memory cards have a protect switch. Protect switch If the protect switch is in the “LOCK” position, you won’t be able to write to the card, and the songs on the card will be protected. Recording If a protected SD memory card is inserted in the CD-2e, you won’t be able to record on that card. Nor will you be able to edit or delete songs, or format the card. Checking / Preparations About the protect switch fig.
PAGE 26
CD-2e_e.book 26 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing an SD Memory Card (continued) Removing an SD Memory Card Note Do not remove the SD memory card while the CD-2e is powered up. Doing so may damage the data stored on the SD memory card. 1 Turn the power off (☞ Page 21, 23). 2 Gently press the SD memory card inward, and then release your finger. When the memory card pops part of the way out, pull it all the way out.
PAGE 27
CD-2e_e.book 27 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing a CD Checking / Preparations Here’s how to prepare a CD-R/RW disc for recording or a music CD for playback. For recommended manufacturers of CD-R/RW discs, refer to “Recommended CD-R/RW Disc Manufacturers” (Page 123). Inserting a CD Recording Note Do not use CDs that have a CD label or sticker affixed to them. You may be unable to remove the CD, or it may cause the CD-2e to malfunction.
PAGE 28
CD-2e_e.book 28 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing a CD (continued) Removing a CD 1 Press the [EJECT( )] button. After the CD has been ejected, pull it all the way out. fig.CD04.eps If the screen shows “Finalize Are You Sure?” fig.finalize-mssg01.eps If the CD-R/RW disc has not been finalized, a message will ask “Finalize Are You Sure?” If you don’t want to finalize the disc for playing on other CD players, press the [EXIT] button and remove the disc after it’s been ejected.
PAGE 29
CD-2e_e.book 29 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing the Remote Control Checking / Preparations Installing Batteries in the Remote Control Install a coin-type lithium battery (included) in the remote control. fig.remote01-e.eps 1 Batteries to use: Lithium battery (CR2025) 2 Listening Back side of the remote control Recording Press here in the direction of the arrow while you pull out the holder. Battery holder * Use only the specified type (model no.CR2025) of lithium battery.
PAGE 30
CD-2e_e.book 30 ページ２００７年１０月２４日水曜日午前１１時１６分 Preparing the Remote Control (continued) Disabling remote control operation If you want to prevent inadvertent operation of the remote control, you can disable remote operation. 1 Press the [MENU] button to access the menu screen, and choose “Remote Control.” Press the [MENU] button to access the menu screen. Use the [ Control.” ][ ] buttons to choose “Remote Press the [ENTER] button to confirm your choice.
PAGE 31
CD-2e_e.book 31 ページ２００７年１０月２４日水曜日午前１１時１６分 Menu Operations You can’t access the menu screen during recording-standby mode or recording. Also, there are some settings that cannot be made while the CD-2e is running on batteries or is playing back. 1 Press the [MENU] button to access the menu screen. Recording For details on each setting, refer to “List of Settings” on the following page. Checking / Preparations When you press the [MENU] button, the menu screen will appear.
PAGE 32
CD-2e_e.book 32 ページ２００７年１０月２４日水曜日午前１１時１６分 Menu Operations (continued) List of Settings * The default value (factory setting) is printed in bold characters. * The ✓ symbol in the “Battery” or “Playback” column indicates a setting that can be made while the CD-2e is running on batteries or playing back. Battery Playback ✓ ✓ Page 52 ✓ ✓ Page 55 Page 56 ✓ ✓ Page 55 ✓ ✓ Page 56 Off, 1–16 ✓ ✓ Page 58 Key (Changes the key at which the song plays.
PAGE 33
CD-2e_e.book 33 ページ２００７年１０月２４日水曜日午前１１時１６分 Menu Operations (continued) Overdub SD→SD? (Records another performance or vocal onto a song you recorded on an SD memory card.) — Format? (Formats the SD memory card.) CD-R/RW ✓ Page 49 — ✓ Page 104 Card Info (Displays information about the SD memory card.) — ✓ Page 93 Erase Last? (Deletes the last song from the CD-RW disc.) — CD Erase All? (Deletes all songs from the CD-RW disc.) — Unfinalize? (Removes finalization from the CD-RW disc.
PAGE 34
CD-2e_e.book 34 ページ２００７年１０月２４日水曜日午前１１時１６分 About Easy Guide Easy Guide is a convenient function that lets you operate the CD-2e simply by following the on-screen instructions without having to open the owner’s manual. 1 Press the [EASY GUIDE] button. fig.guide01-e.eps Item Explanation of operation 2 Use the [ ][ ] buttons to select the item for which you want to see an operation guide. fig.menu02.eps Easy Guide is available for the following seven operations. 3 Item Explanation 1.
PAGE 35
CD-2e_e.book 35 ページ２００７年１０月２４日水曜日午前１１時１６分 Before You Start Recording Each track on a music CD must be at least four seconds long. Since the CD-2e creates music CDs from the songs you record, it does not allow you to record a track that’s less than four seconds long. Further recording is not possible once you’ve reached the maximum recordable time or the maximum number of songs that can be recorded. If there is no more recordable time, the message “SD Card Full” or “CD Disc Full” will appear.
PAGE 36
CD-2e_e.book 36 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Acoustic Instruments or Vocals Recording with the Internal Mics ig.intmic-e.eps The internal mics are stereo mics. Sound picked up by the mic on the left side of the CD-2e is recorded on the left channel (L), while sound from the mic on the right side is recorded on the right channel (R). Internal mic (left channel) Internal mic (right channel) If you’re recording to a CD-R/RW disc If you’re recording to an SD memory card 1 Turn on the power.
PAGE 37
CD-2e_e.book 37 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Acoustic Instruments or Vocals (continued) Adjust the input level of the internal mics. On the CD-2e’s left side, set the [MIC LEVEL] switch to its “MANUAL” position. fig.rec-intmic02.eps Checking / Preparations 6 Recording Turn the [MIC] knob to adjust the input level of the internal mics. While producing the sound that you’ll actually be recording, turn the [MIC] knob to adjust the input level.
PAGE 38
CD-2e_e.book 38 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Acoustic Instruments or Vocals (continued) 9 Press the [ (Stop)] button to stop recording. fig.rec-intmic06-e.eps Remote control The recorded song will be added to the end of the SD memory card or CD-R/RW disc. If you want to listen to the song you recorded, press the [ (Play)] button immediately after you stop recording.
PAGE 39
CD-2e_e.book 39 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Acoustic Instruments or Vocals (continued) Connecting an External Mic for Recording Checking / Preparations fig.extmic.eps You can connect a dynamic mic for recording. Dynamic mics are highly durable, and are suitable for recording instruments or vocals. They also have the advantage of not requiring a power supply. Recording * Condenser mics are not supported. Turn on the power. (☞ Page 21, 22) 1 Turn on the power.
PAGE 40
CD-2e_e.book 40 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Acoustic Instruments or Vocals (continued) 6 Adjust the input level of the external mic. On the CD-2e’s left side, set the [MIC LEVEL] switch to its “MANUAL” position. fig.rec-intmic02.eps Turn the [MIC] knob to adjust the input level of the external mics. Adjust the loudness of the sound you’re recording. Since you’re not using the line input, turn the [LINE] knob all the way to the left (off).
PAGE 41
CD-2e_e.book 41 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Acoustic Instruments or Vocals (continued) 9 Press the [ (Stop)] button to stop recording. fig.rec-intmic06-e.eps Recording The recorded song will be added to the end of the SD memory card or CD-R/RW disc. If you want to listen to the song you recorded, press the [ (Play)] button immediately after you stop recording.
PAGE 42
CD-2e_e.book 42 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording an Electronic Instrument Here’s how to connect an electronic instrument such as a digital piano or keyboard, and record your performance. If you’re recording to a CD-R/RW disc If you’re recording to an SD memory card 1 Turn on the power. (☞ Page 21, 22) 1 Turn on the power. (☞ Page 21) 2 Insert the SD memory card. (☞ Page 24) 2 Insert the CD. (☞ Page 27) 3 Set the audio source to “SD.” 3 Set the audio source to “CD.
PAGE 43
CD-2e_e.book 43 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording an Electronic Instrument (continued) Press the [ (Record)] button to enter recording-standby mode. Checking / Preparations 6 fig.rec-intmic04-e.eps Blinking Press the [ Recording 7 Remote control (Play)] button to begin recording. Start your performance. fig.rec-intmic05-e.eps Lit Remote control Listening Press the [ (Stop)] button to stop recording. Deleting 8 fig.rec-intmic06-e.
PAGE 44
CD-2e_e.book 44 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording a Cassette or MD Here’s how to record the sound from a cassette or MD. If you’re recording to a CD-R/RW disc If you’re recording to an SD memory card 1 Turn on the power. (☞ Page 21, 22) 1 Turn on the power. (☞ Page 21) 2 Insert the SD memory card. (☞ Page 24) 2 Insert the CD. (☞ Page 27) 3 Set the audio source to “SD.” 3 Press the [SD CARD] button so it’s lit. fig.selectCD-e.eps 4 Set the audio source to “CD.
PAGE 45
CD-2e_e.book 45 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording a Cassette or MD (continued) Press the [ (Record)] button to enter recording-standby mode. fig.rec-intmic04-e.eps Blinking Press the [ (Play)] button to begin recording. Recording 7 Remote control Checking / Preparations 6 Start your performance. Play back your audio device (e.g., cassette deck). The song being played will be recorded. 9 Press the [ Listening 8 (Stop)] button to stop recording. fig.rec-intmic06-e.
PAGE 46
CD-2e_e.book 46 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Karaoke Here’s how the sound from a karaoke CD and the sound of your voice from a mic can be recorded together to an SD memory card (i.e., overdubbing that adds your voice or performance to a song from CD). The CD-2e provides a Center Cancel function, which lets you use a commercial CD as a simple karaoke source. For details, refer to “Enjoying Simple Karaoke (Center Cancel)” (Page 64).
PAGE 47
CD-2e_e.book 47 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Karaoke (continued) Adjust the CD’s playback level and the mic’s input level. Adjust the levels to obtain the desired volume balance between the CD and the mic. * If sound from the speakers enters the mic, you won’t be able to adjust the level correctly. While adjusting the level, either turn the [VOLUME] knob all the way down or set the [SPEAKER] switch located on the side of the CD-2e to the “OFF” position, so no sound will be produced.
PAGE 48
CD-2e_e.book 48 ページ２００７年１０月２４日水曜日午前１１時１６分 Recording Karaoke (continued) 7 Press the [ (Play)] button to begin recording. The music CD track you selected in Step 4begins playing, and recording on the SD memory card begins simultaneously. Record your vocal or instrumental performance. fig.overdub-CD03-e.eps Lit During recording, the upper right of the screen will show “CD → SD.” Remote control When CD playback stops at the end of the song, recording will also end automatically.
PAGE 49
CD-2e_e.book 49 ページ２００７年１０月２４日水曜日午前１１時１６分 Layering Your Performance onto an SD Memory Card Song and Recording It Since you can perform and overdub each part separately, this allows you to record your piano performance, and then sing along to add a vocal to your performance.
PAGE 50
CD-2e_e.book 50 ページ２００７年１０月２４日水曜日午前１１時１６分 Layering Your Performance onto an SD Memory Card Song and Recording It (continued) 5 Adjust the playback level of the SD memory card and the input level of the audio input. Adjust each level to obtain the appropriate volume balance between the SD memory card audio and the audio input. Press the [ Press the [ (Play)] button to play back the SD memory card. ] or [ ] button to access the SD/CD Level setting screen.
PAGE 51
CD-2e_e.book 51 ページ２００７年１０月２４日水曜日午前１１時１６分 Layering Your Performance onto an SD Memory Card Song and Recording It (continued) 7 Press the [ (Play)] button to begin recording. fig.overdub-SD03.eps Lit During recording, the upper right of the screen will show “SD → SD.” Recording Remote control Listening 8 Checking / Preparations When the SD memory card song you selected in Step 4begins playing, recording on the SD memory card will begin simultaneously. Start your performance.
PAGE 52
CD-2e_e.book 52 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording Automatically Starting Recording When Audio is Detected When the CD-2e is in recording-standby mode and it detects audio input that exceeds the specified level, recording will start automatically. 1 Press the [MENU] button to access the menu screen, and choose “Auto Rec Start.” fig.menu-autorec01-e.eps Press the [MENU] button to access the menu screen. Use the [ Start.
PAGE 53
CD-2e_e.book 53 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) 1 Press the [ (Record)] button. Checking / Preparations When you make settings for automatic recording, the procedure for starting to record will be as follows. fig.autorec01-e.eps Press the [ (Play)] button. The CD-2e will be in recording-standby mode. Listening 2 Recording Blinking fig.autorec02-e.eps Blinking Deleting Start performing.
PAGE 54
CD-2e_e.book 54 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) Assigning Song Numbers While Recording (Marker) During recording, you can assign a song number so that the subsequent material will be recorded as the next song. You can assign song numbers in the following three ways.
PAGE 55
CD-2e_e.book 55 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) Automatically Assigning a Song Number at Fixed Intervals Specify how the song numbers will be assigned. fig.menu-automarker01-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Auto Marker.” Use the [+] [-] buttons to specify the desired “Time.” Song numbers will not be assigned automatically.
PAGE 56
CD-2e_e.book 56 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) Assigning Track Numbers When Silence is Detected If a period of silence lasting longer than one second is detected during recording, recording will automatically pause. Then, when audio exceeding the specified level is subsequently detected, a song number will be assigned and recording will automatically resume.
PAGE 57
CD-2e_e.book 57 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) Preventing Loud Sounds from Distorting (Limiter) 1 fig.menu-limiter01.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Limiter.” Use the [+] [-] buttons to turn the limiter on/off. Listening Press the [ENTER] button to confirm your choice. 2 Recording Press the [MENU] button to access the menu screen, and choose “Limiter.
PAGE 58
CD-2e_e.book 58 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) Inserting a Count before Recording Begins (Count-in) You can sound a count before recording begins. Hearing a count can help you practice the timing or tempo of your performance before you actually start recording. 1 Press the [ (Metronome)] button to turn on the metronome. fig.countin01-e.eps Lit 2 Specify the sound, tempo, and time signature of the count.
PAGE 59
CD-2e_e.book 59 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Recording (continued) If you’ve specified a count-in, the procedure for starting to record will be as follows. Press the [ (Record)] button. The CD-2e will be in recording-standby mode. fig.autorec01-e.eps Checking / Preparations 1 Blinking Recording 2 Press the [ (Play)] button. The count will not be played through the speakers. You’ll need to use headphones to hear the count.
PAGE 60
CD-2e_e.book 60 ページ２００７年１０月２４日水曜日午前１１時１６分 Listening to a CD/ Listening to an SD Memory Card * In order to play a CD, you’ll need to use the dedicated AC adaptor, which was included with the CD-2e. Listening to a CD Listening to an SD memory card 1 Turn on the power. 1 Turn on the power. 2 3 Insert the CD. 2 3 Insert the SD memory card. Set the audio source to “CD.” Press the [CD] button so it’s lit. Set the audio source to “SD.” Press the [SD CARD] button so it’s lit. fig.selectCD-e.
PAGE 61
CD-2e_e.book 61 ページ２００７年１０月２４日水曜日午前１１時１６分 Listening to a CD/ Listening to an SD Memory Card (continued) fig.tansport-remote-e.eps Checking / Preparations Remote operations Song cue, rewind/fast-forward Song stop/play (pause) Adjusting the volume Note Higher volume. 1 fig.menu-resume01-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Resume.” 2 Use the [+] [-] buttons to turn the Resume function on/off. fig.menu-resume02-e.
PAGE 62
CD-2e_e.book 62 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback Changing the Key of the Playback This adjusts the key (pitch) of the playback sound in semitone steps. This can be useful in situations like the following. 1 ● You want to practice flute along with an accompaniment CD that was created for alto sax. ● You want to sing along with a karaoke CD at a key that’s easier for you to sing. Press the [MENU] button to access the menu screen, and choose “Key.” fig.menu-key01-e.
PAGE 63
CD-2e_e.book 63 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) This adjusts the pitch of the playback sound in one-cent steps. One cent is 1/100th of a semitone. When you’re using an instrument that is not easily tuned, such as an acoustic piano, you can adjust the pitch of the CD so that it matches your instrument. Press the [MENU] button to access the menu screen, and choose “Pitch.” fig.menu-pitch01-e.eps Press the [MENU] button to access the menu screen.
PAGE 64
CD-2e_e.book 64 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) Enjoying Simple Karaoke (Center Cancel) This function cancels the portion of the sound that is heard in the center of its stereo image, such as the main vocal or lead guitar, making it less audible. This lets you use a commercially available CD as a simple karaoke source, giving you an easy way to enjoy karaoke or to practice singing or playing an instrument.
PAGE 65
CD-2e_e.book 65 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) Repeatedly Playing Tracks (1 Track/All Repeat) 1 Checking / Preparations You can have a favorite track (or all tracks) play back repeatedly. Press the [MENU] button to access the menu screen, and choose “Repeat.” Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Repeat.” Recording fig.menu-repeat01-e.eps Press the [ENTER] button to confirm your choice.
PAGE 66
CD-2e_e.book 66 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) A-B Repeat Playback You can have a specified section play back repeatedly. Repeatedly listening to a section of a song is convenient when you’re practicing your instrument along with the song, or learning the song by ear. 1 During playback, press the [REPEAT] button at the point where you want Repeat Play to start. The starting point (A) of A-B Repeat playback is registered, and the Point A icon blinks. fig.
PAGE 67
CD-2e_e.book 67 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) Slowing Down or Speeding Up Playback This is useful when you are learning a song by ear and want to hear it slowly, or if you want to quickly listen to a song that you recorded. Press the [MENU] button to access the menu screen, and choose “Speed.” fig.menu-speed01-e.eps Recording 1 Checking / Preparations You can make the playback speed slower or faster.
PAGE 68
CD-2e_e.book 68 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) Adding Reverberation (Reverb) This function adds reverberation (reverb) to the audio played back from an SD memory card or CD, creating the impression that the performance is occurring in a concert hall or other real-world acoustic environment. 1 Use the [REVERB] button to select the depth of reverb. Pressing the [REVERB] button cycles through the following settings.
PAGE 69
CD-2e_e.book 69 ページ２００７年１０月２４日水曜日午前１１時１６分 Convenient Functions for Playback (continued) Muting the Sound of the Speakers fig.speaker.eps Checking / Preparations If you don’t want sound to be heard from the speakers, set the [SPEAKER] switch located on the rear of the CD-2e to its “OFF” position. Recording Deleting Even if the [SPEAKER] switch is in the “ON” position (so that sound is produced), sound will not be heard from the speakers during recording-standby mode or during recording.
PAGE 70
CD-2e_e.book 70 ページ２００７年１０月２４日水曜日午前１１時１６分 Deleting Songs from an SD Memory Card Deleting Songs Individually Here’s how to delete a single, selected song. When you delete a song, subsequent songs will be moved forward, incrementing their song numbers. Track 1 Number 3 B C C Blank Delete fig.SDedit-erase-e.eps Track 1 Number 1 2 A 2 A Insert the SD memory card that you want to edit, and press the [SD CARD] button. SD becomes the audio source.
PAGE 71
CD-2e_e.book 71 ページ２００７年１０月２４日水曜日午前１１時１６分 Deleting Songs from an SD Memory Card (continued) I Here’s how to delete all songs from the SD memory card. Insert the SD memory card that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “SD Erase All?” Recording 1 Checking / Preparations Erasing All Tracks fig.menu-SDeraseall-e.eps Press the [MENU] button to access the menu screen.
PAGE 72
CD-2e_e.book 72 ページ２００７年１０月２４日水曜日午前１１時１６分 Deleting Songs from an SD Memory Card (continued) Deleting an Unwanted Region at the Beginning of the Song (Trim In) If you start recording slightly ahead of the beginning of the performance so as to avoid missing anything, there will be some unwanted silence at the beginning of the song. You can delete this unwanted silence so that you will hear sound as soon as the song starts playing.
PAGE 73
CD-2e_e.book 73 ページ２００７年１０月２４日水曜日午前１１時１６分 Deleting Songs from an SD Memory Card (continued) Press the [ENTER] button. 8 If you’re sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) fig.trimin-mssg-e.eps Checking / Preparations 7 Recording Progress indication Listening The display will show “Processing...”, and the unwanted beginning of the song will be deleted. When the deletion is completed, you’re returned to the audio source screen.
PAGE 74
CD-2e_e.book 74 ページ２００７年１０月２４日水曜日午前１１時１６分 Deleting Songs from an SD Memory Card (continued) Deleting an Unwanted Region at the End of the Song (Trim Out) If you stop recording slightly after the end of the performance so as to avoid missing anything, there will be some unwanted silence at the end of the song. You can delete this unwanted silence so that the song contains only the performance itself. 1 Insert the SD memory card that you want to edit, and press the [SD CARD] button.
PAGE 75
CD-2e_e.book 75 ページ２００７年１０月２４日水曜日午前１１時１６分 Deleting Songs from an SD Memory Card (continued) Press the [ENTER] button. 8 If you’re sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) fig.trimout-mssg-e.eps Checking / Preparations 7 Recording Progress indication Listening The display will show “Processing...”, and the unwanted end of the song will be deleted. When the deletion is completed, you’re returned to the audio source screen.
PAGE 76
CD-2e_e.book 76 ページ２００７年１０月２４日水曜日午前１１時１６分 Erasing Tracks from a CD-RW Disc Deleting One Song at a Time (Only the Last Song) Here’s how to erase the last track recorded on a CD-RW disc. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 1 Insert the CD-RW disc that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “Erase Last?” fig.menu-RWerase-e.eps Press the [MENU] button to access the menu screen.
PAGE 77
CD-2e_e.book 77 ページ２００７年１０月２４日水曜日午前１１時１６分 Erasing Tracks from a CD-RW Disc (continued) Here’s how to erase all tracks from the CD-RW disc. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Checking / Preparations Erasing All Tracks Recording 1 Insert the CD-RW disc that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “CD Erase All?” fig.menu-RWeraseall-e.
PAGE 78
CD-2e_e.book 78 ページ２００７年１０月２４日水曜日午前１１時１６分 Erasing Tracks from a CD-RW Disc (continued) Removing Finalization You can remove finalization from a CD-RW disc (Page 83) so that the disc can once again be used for recording.Removing finalization will not erase the recorded tracks. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 1 Insert the CD-RW disc that you want to edit, and press the [CD] button. CD becomes the audio source.
PAGE 79
CD-2e_e.book 79 ページ２００７年１０月２４日水曜日午前１１時１６分 Selecting Songs from an SD Memory Card to Create a CD * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Insert the SD memory card that contains the songs you want to turn into a music CD. 2 Press the [MENU] button to access the menu screen, and choose “Write (SD→CD)?” Use the [ ][ (SD→CD)?” ] buttons to choose “Write Listening Press the [MENU] button to access the menu screen.
PAGE 80
CD-2e_e.book 80 ページ２００７年１０月２４日水曜日午前１１時１６分 Selecting Songs from an SD Memory Card to Create a CD (continued) 7 If you’re sure you want to proceed, press the [ETNER] button. (If you decide to cancel, press the [EXIT] button.) fig.writeCD-mssg03-e.eps 8 Use the [+] [-] buttons to specify the Finalize setting. * For details on “Finalize,” refer to the text box “What’s finalization?” on Page 83. fig.writeCD-finalize-e.
PAGE 81
CD-2e_e.book 81 ページ２００７年１０月２４日水曜日午前１１時１６分 Selecting Songs from an SD Memory Card to Create a CD (continued) 10 The CD-2e asks whether you want to create another identical CD. fig.writeCD-mssg06-e.eps Checking / Preparations If you want to create another identical CD Press the [EXIT] button to end the procedure. When you see this screen, insert a blank or un-finalized CD-R/RW disc. fig.writeCD-mssg01.eps Listening Return to Step procedure. You’re returned to the audio source screen.
PAGE 82
CD-2e_e.book 82 ページ２００７年１０月２４日水曜日午前１１時１６分 Selecting Songs from an SD Memory Card to Create a CD (continued) Creating a music CD from songs recorded on an EDIROL R-09 “WAV 16-bit” and “44.1 kHz” is supported If you want to create a music CD using songs that were recorded on an EDIROL R-09, you must set the R-09’s recording mode to “WAV 16-bit” and sampling frequency to “44.1 kHz” before you record.
PAGE 83
CD-2e_e.book 83 ページ２００７年１０月２４日水曜日午前１１時１６分 Making a CD-R/RW Disc for Playback on Another CD Player (Finalize) * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 2 Press the [EJECT ( 3 If you’re sure you want to proceed, press the [ENTER] button. (If you decide not to finalize the disc, press the [EXIT] button.) )] button. fig.finalize-mssg02-e.eps When finalization is completed, the CD-R/RW disc is ejected. Your music CD is now ready.
PAGE 84
CD-2e_e.book 84 ページ２００７年１０月２４日水曜日午前１１時１６分 Creating a Duplicate of an Original Music CD (Backup) Here’s how to back up an original music CD you created, making an identical copy of your original music CD. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Workflow to Back up CDs When copying a music CD, the CD tracks are stored temporarily on an SD memory card. The temporary tracks on the SD memory card are written to a blank CD-R/RW disc.
PAGE 85
CD-2e_e.book 85 ページ２００７年１０月２４日水曜日午前１１時１６分 Creating a Duplicate of an Original Music CD (Backup) (continued) When you see this screen, insert a blank CD-R/RW disc. fig.CDbackup-mssg02-e.eps If you’re sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) fig.CDbackup-mssg03-e.eps 6 The CD-2e asks whether you want to create another identical CD. Deleting The display will show “Processing...”, and the backup will begin.
PAGE 86
CD-2e_e.book 86 ページ２００７年１０月２４日水曜日午前１１時１６分 Creating a Duplicate of an Original Music CD (Backup) (continued) If the screen shows “Tr ##/xx Tr. Are You Sure?” (Step 3) The music CD’s tracks will be written as far as the free space on the SD memory card allows. This means that if the SD memory card contains less free space than the amount of data from the music CD, you won’t be able to record all of the tracks. In this case, the message “Copy ##/xx Tr. Are You Sure?” will appear.
PAGE 87
CD-2e_e.book 87 ページ２００７年１０月２４日水曜日午前１１時１６分 Moving a Song Track 1 Number 2 A 3 B C fig.SDedit-move-e.eps Move Track 1 Number 3 C B Insert the SD memory card that you want to edit, and press the [SD CARD] button. Recording 1 2 A Checking / Preparations This operation moves a song by changing the order of the songs. SD becomes the audio source. Use the [ 3 Press the [MENU] button to access the menu screen, and choose “Move?” ][ ] buttons to select the song that you want to move.
PAGE 88
CD-2e_e.book 88 ページ２００７年１０月２４日水曜日午前１１時１６分 Dividing a Track This operation divides a song into two songs. Track 1 Number Track 1 Number 1 2 A B Divide 2 3 A A” B Insert the SD memory card that you want to edit, and press the [SD CARD] button. SD becomes the audio source. 2 Use the [ 3 Press the [MENU] button to access the menu screen, and choose “Divide?” ] or [ ] button to select the track you want to edit. fig.menu-divide01-e.eps Press the [MENU] button to access the menu screen.
PAGE 89
CD-2e_e.book 89 ページ２００７年１０月２４日水曜日午前１１時１６分 Dividing a Track (continued) If you’re sure you want to proceed, press the [ENTER] button. (If you decide to cancel, press the [EXIT] button.) fig.divide-mssg-e.eps Important ● Dividing a song will require free space equal to the size of the song you’re editing. For example, if you’re editing a five-minute song, you won’t be able to execute this operation unless you have at least five minutes of recording time remaining.
PAGE 90
CD-2e_e.book 90 ページ２００７年１０月２４日水曜日午前１１時１６分 Joining Songs This operation join two songs, making them into a single song. The song will be joined with the following song. Track 1 Number fig.SDedit-combine-e.eps Track 1 Number 1 2 A 3 B C Join 2 A B+C Insert the SD memory card that you want to edit, and press the [SD CARD] button. SD becomes the audio source. 2 Use the [ ][ ] buttons to select the song you want to join. This song will be joined with the song that follows it.
PAGE 91
CD-2e_e.book 91 ページ２００７年１０月２４日水曜日午前１１時１６分 Maximizing the Volume of a Song 1 SD becomes the audio source. 2 Use the [ 3 Press the [MENU] button to access the menu screen, and choose “Normalize?” ] or [ Recording Insert the SD memory card that you want to edit, and press the [SD CARD] button. Checking / Preparations This operation raises the volume of the entire song as high as possible without causing the sound to distort.
PAGE 92
CD-2e_e.book 92 ページ２００７年１０月２４日水曜日午前１１時１６分 Viewing the Remaining Recording/Playback Time Here’s how to switch the time information shown in the screen. You can view the remaining time that can be recorded on an SD memory card or CD-R/RW disc, or the time remaining in a song. fig.display-e.eps Press the [ENTER] button to switch between the available choices for the time indicator, as follows. During recording or recording standby fig.remain01-e.
PAGE 93
CD-2e_e.book 93 ページ２００７年１０月２４日水曜日午前１１時１６分 Viewing Information about an SD Memory Card 1 Press the [MENU] button to access the menu screen, and choose “Card Info.” Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Card Info.” Recording fig.menu-SDinfo01-e.eps Checking / Preparations Here’s how to view information such as the capacity of an SD memory card and the remaining time for recording. Press the [ENTER] button to confirm your choice.
PAGE 94
CD-2e_e.book 94 ページ２００７年１０月２４日水曜日午前１１時１６分 Viewing Information about a CD-R/RW Disc Here’s how to view information such as the capacity of a CD-R/RW disc and the remaining time for recording. 1 Press the [MENU] button to access the menu screen, and choose “Disc Info.” fig.menu-CDinfo01-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Disc Info.” Press the [ENTER] button to confirm your choice. 2 View the information. fig.menu-CDinfo02-e.
PAGE 95
CD-2e_e.book 95 ページ２００７年１０月２４日水曜日午前１１時１６分 Adjusting the Readability of the Screen (Contrast) 1 Press the [MENU] button to access the menu screen, and choose “Contrast.” Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Contrast.” Recording fig.menu-contrast01-e.eps Checking / Preparations Depending on the temperature or other conditions, the characters in the screen may become difficult to read. In such cases, you can adjust the contrast for best readability.
PAGE 96
CD-2e_e.book 96 ページ２００７年１０月２４日水曜日午前１１時１６分 Automatically Dimming the Screen (Backlight Timer) If you’re operating the CD-2e on batteries (Page 22), you can set this function so that the screen will automatically be dimmed to conserve batteries after no operation has been performed for a certain length of time. * This setting is effective only when the CD-2e is running on batteries. The screen will not dim if you’re using the dedicated AC adaptor (Page 21).
PAGE 97
CD-2e_e.book 97 ページ２００７年１０月２４日水曜日午前１１時１６分 Changing the Screen Display Language Turn off the power. 2 Refer to the table below, and while holding down the button that corresponds to the desired screen display language, turn on the power. For example, if you want to set the screen display language to “French,” hold down the [REVERB] button and turn on the power.When the screen appears, release the button.
PAGE 98
CD-2e_e.book 98 ページ２００７年１０月２４日水曜日午前１１時１６分 Sounding the Metronome The CD-2e has built-in metronome—a convenient feature for practicing an instrument. 1 Press the [ (Metronome)] button to turn the metronome on. fig.metro-indicator-e.eps Red: strong beats Green: weak beats Metronome indicator (blinking) If the metronome is on, the [ (Metronome)] button will light. At the same time, the metronome’s indicator will start blinking on the beat. When you press the [ (unlit).
PAGE 99
CD-2e_e.book 99 ページ２００７年１０月２４日水曜日午前１１時１６分 Sounding the Metronome (continued) Specifying which beats are emphasized. fig.menu-metro05-e.eps Press the [EXIT] button to return to the menu screen. Use the [ ][ ] buttons to choose “Beat.” Use the [+] [-] buttons to specify the timing at which the metronome will mark the strong beats. No beats are emphasized. 1 Every beat is emphasized. 2 Every second beat is emphasized. 3 Every third beat is emphasized.
PAGE 100
CD-2e_e.book 100 ページ２００７年１０月２４日水曜日午前１１時１６分 Tuning Your Instrument (Tuner Function) You can tune your instrument using the chromatic tuner function, which detects the name of the note in semitone steps. 1 Set the [MIC SELECT] switch located on the side of the CD-2e to the “INT” (internal mic) position. This allows you to tune by inputting the sound of your instrument via the internal mic. fig.tuner-mic.eps 2 Press the [MENU] button to access the menu screen, and choose “Tuner/ Tone?” fig.
PAGE 101
CD-2e_e.book 101 ページ２００７年１０月２４日水曜日午前１１時１６分 Tuning Your Instrument (Tuner Function) (continued) When you’re finished using the tuner, press the [EXIT] button twice. You’re returned to the audio source screen. Important The tuner can also use an external mic. If you want to use an external mic, set the [MIC SELECT] switch to the “EXT” (external mic) position. ● You can’t play back or record while using the tuner.
PAGE 102
CD-2e_e.book 102 ページ２００７年１０月２４日水曜日午前１１時１６分 Tuning Your Instrument (Tuner Function) (continued) Listening to a Guide Tone While Tuning As a tuning aid, you can have the CD-2e sound a guide tone from the internal speakers. 1 Press the [MENU] button to access the menu screen, and choose “Tuner/ Tone?” fig.menu-tuner01-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Tuner/Tone?” Press the [ENTER] button to confirm your choice.
PAGE 103
CD-2e_e.book 103 ページ２００７年１０月２４日水曜日午前１１時１６分 Returning the Menu Settings to their Factory-Set Condition (Factory Reset) If the CD-2e does not operate as you expect even when you follow the steps in this manual, you may wish to execute the Initialize operation. Press the [MENU] button to access the menu screen, and choose “Factory Reset?” fig.menu-reset-e.
PAGE 104
CD-2e_e.book 104 ページ２００７年１０月２４日水曜日午前１１時１６分 Formatting an SD Memory Card If an SD memory card has been used on a computer or other device, and any data remains on that SD memory card, there will be correspondingly less available recording time. By formatting the SD memory card, you can erase all data from the card, ensuring that the full capacity of the card will be available for recording. Note ● Never turn off the power or remove the SD memory card while formatting is in progress.
PAGE 105
CD-2e_e.book 105 ページ２００７年１０月２４日水曜日午前１１時１６分 Adjusting the Left/Right Volume Balance of the Internal Mics In such cases, you can adjust the left/right volume balance of the internal mics to compensate for the position in which the CD-2e is placed. On the side panel of the CD-2e, set the [MIC SELECT] switch to the “INT” (internal mic) position. 2 Press the [MENU] button to access the menu screen, and choose “INT MIC Balance.” Press the [MENU] button to access the menu screen. Use the [ Balance.
PAGE 106
CD-2e_e.book 106 ページ２００７年１０月２４日水曜日午前１１時１６分 Reversing the Stereo Field of the Internal Mics When using the internal mics (Page 36), the sound from the mic at the left side of the CD-2e will be recorded on the left channel (L), and the sound from the right mic will be recorded on the right channel (R).
PAGE 107
CD-2e_e.book 107 ページ２００７年１０月２４日水曜日午前１１時１６分 Reversing the Stereo Field of the Internal Mics (continued) 1 Press the [MENU] button to access the menu screen, and choose “INT MIC Exchange.” Checking / Preparations Here’s how to exchange the right and left channels of the internal mics. fig.menu-format-e.eps Use the [ ][ Exchange.” ] buttons to choose “INT MIC Recording Press the [MENU] button to access the menu screen. Press the [ENTER] button to confirm your choice.
PAGE 108
CD-2e_e.book 108 ページ２００７年１０月２４日水曜日午前１１時１６分 Connecting External Speakers You can connect external speakers to the LINE OUT jack and use them to listen to playback from the CD-2e or the sound received at its inputs. If you connect the LINE OUT jack to the input jack of your digital piano, you’ll be able to listen to the sound using the built-in speakers of your digital piano. Note You must turn on the power using the following procedure.
PAGE 109
CD-2e_e.book 109 ページ２００７年１０月２４日水曜日午前１１時１６分 Connecting External Speakers (continued) Checking / Preparations Selecting the Audio Source that’s Sent from the LINE OUT Jack You can choose the audio source that is output from the LINE OUT jack. Press the [MENU] button to access the menu screen, and choose “LINE OUT Select.” Recording 1 fig.menu-format-e.eps Press the [MENU] button to access the menu screen. ][ ] buttons to choose “LINE OUT Press the [ENTER] button to confirm your choice.
PAGE 110
CD-2e_e.book 110 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting If you suspect a malfunction, please check the following points. If this does not resolve the problem, contact a nearby Roland Service Center. Power Supply Problem Cause and Action The power does not turn ● Could you be using an AC adaptor other than the included one? on when you move the ➔ Use included dedicated AC adaptor. [POWER] switch to the ● Could the AC adaptor plug have been disconnected from the CD-2e’s “ON” position.
PAGE 111
CD-2e_e.book 111 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting (continued) Problem See Page ● Could the connections be incorrect? ➔ Make the correct connections. 39, 42, 44 ➔ Turn on the power. — ● Could the volume of the connected device be turned down? ➔ Raise the volume of the connected device. — — ● Is the volume set to the minimum? ➔ Use the [VOLUME] knob to raise the volume.
PAGE 112
CD-2e_e.book 112 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting (continued) Problems with the Sound (continued) Problem Cause and Action Insufficient volume from ● Could you be using a connection cable that contains an internal resistor? a device connected to the EXT MIC (L/MONO, R) ➔ Use a connection cable—such as one from the Roland PCS series— that /LINE IN jacks does not contain an internal resistor.
PAGE 113
CD-2e_e.book 113 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting (continued) CD-Related Problems Can’t insert a CD See Page Cause and Action ➔ Use the dedicated AC adaptor. Normal playback does not work 21 Recording ● Could you be using batteries? If you’re operating the CD-2e on batteries, no CD-related operations can be performed. Checking / Preparations Problem ● Is the audio source set to “CD”? ➔ Press the [CD] button to choose “CD” as the audio source.
PAGE 114
CD-2e_e.book 114 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting (continued) CD-Related Problems (continued) Problem Can’t record Cause and Action See Page ● Could the CD be upside down? ➔ Insert the CD with the label facing upward. 27 ● Could you be attempting to record on a CD-R/RW disc that has already been finalized? ➔ Use a blank or un-finalized CD-R/RW disc.
PAGE 115
CD-2e_e.book 115 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting (continued) SD Memory Card-Related Problems ● Could the SD memory card be of a capacity that is not supported? ➔ Check the capacity of the SD memory card, and use a card of a capacity supported by the CD-2e. 122 ● Is the SD memory card inserted all the way into the slot? ➔ Make sure that the card is oriented correctly, and that it’s pushed all the way into the slot.
PAGE 116
CD-2e_e.book 116 ページ２００７年１０月２４日水曜日午前１１時１６分 Troubleshooting (continued) SD Memory Card-Related Problems (continued) Problem Cause and Action Insufficient playback volume ● Could the SD memory card playback level be turned down? Can’t record ● Is the SD memory card inserted all the way into the slot? ➔ Use SD/CD Level to raise the playback level. ➔ Make sure that the card is oriented correctly, and that it’s pushed all the way into the slot.
PAGE 117
CD-2e_e.book 117 ページ２００７年１０月２４日水曜日午前１１時１６分 Messages Messages for which the upper line of the screen shows “-- ERROR!--” will disappear when you press the [ENTER] button. Message Content Action The CD-R/RW disc is blank (empty). Use a CD-R/RW disc that isn’t blank. The disc could not be read/written in time. If this appears during playback, use an unscratched disc. If this appears during recording, use a recommended brand of CD-R/RW disc. ☞ Page 123 The CD-R/RW disc is full.
PAGE 118
CD-2e_e.book 118 ページ２００７年１０月２４日水曜日午前１１時１６分 Messages (continued) Message Content Action Only 1 SD Track Since there’s only one song in the SD memory card, you can’t move or join songs. — Please Wait Preparations for playback are being made. Please wait. — Power Down The batteries are depleted. The CD-2e cannot be operated. Please install fresh batteries. Each recording must be longer than four seconds.
PAGE 119
CD-2e_e.book 119 ページ２００７年１０月２４日水曜日午前１１時１６分 Setting Items in Easy Guide 1. Recording Displayed screen Explanation CD-R/RW Choose this if you’re recording on a CD-R/RW disc. SD Card Choose this if you’re recording on an SD memory card. Acoustic Inst Choose this if you’re recording an acoustic instrument (e.g., piano, guitar, string instrument, or wind instrument). Vocal Choose this if you’re recording a vocal. Digital Piano Choose this if you’re recording an electronic musical instrument (e.
PAGE 120
CD-2e_e.book 120 ページ２００７年１０月２４日水曜日午前１１時１６分 Setting Items in Easy Guide (continued) 3. Write (SD→CD) Displayed screen Explanation Select whether or not the disc is to be finalized once writing is complete. Yes When writing has been completed, the disc will be finalized to complete your music CD. No The disc will not be finalized when writing has been completed. 6. Karaoke Displayed screen Explanation Select whether or not the Center Cancel (Page 64) is to be applied.
PAGE 121
CD-2e_e.book 121 ページ２００７年１０月２４日水曜日午前１１時１６分 Specifications 44.1 kHz Signal Processing AD/DA conversion: 24 bits Recording Mode SD Memory Card: WAV (44.
PAGE 122
CD-2e_e.book 122 ページ２００７年１０月２４日水曜日午前１１時１６分 Recommended SD Memory Card Roland recommends the following SD memory cards, which have been confirmed to work with the CD-2e.
PAGE 123
CD-2e_e.book 123 ページ２００７年１０月２４日水曜日午前１１時１６分 Recommended CD-R/RW Disc Manufacturers CD-R Discs Capacity Supported writing speeds TAIYO YUDEN Co.,Ltd. 650MB 700MB Use CD-R discs that support 8x speed. Mitsubishi Chemical Corp. Example: 2-48x speed, 1-32x speed Recording Recommended Manufacturers Checking / Preparations Roland recommends CD-R/RW discs made by the following manufacturers, which have been confirmed to work with the CD-2e. Hitachi Maxell, Ltd. TDK Corp.
PAGE 124
CD-2e_e.book 124 ページ２００７年１０月２４日水曜日午前１１時１６分 Index Creating a CD R-09 ......................................................... 82 Numerics 1 Track Repeat ............................................... 65 D A Adjusting the readability of the screen ........... 95 All Repeat ...................................................... 65 Auto Level ...................................................... 38 Auto Marker ............................................ 55, 56 Auto Marker Lvl ......................
PAGE 125
CD-2e_e.book 125 ページ２００７年１０月２４日水曜日午前１１時１６分 Index (continued) Guide tone .................................................. 102 I P Advanced Uses Pitch .............................................................. 63 Playback 1 Track Repeat .......................................... 65 A-B Repeat ................................................ 66 All Repeat ................................................. 65 Center Cancel ........................................... 64 changing the key .........
PAGE 126
CD-2e_e.book 126 ページ２００７年１０月２４日水曜日午前１１時１６分 Index (continued) R R-09 ............................................................... 82 Recommended manufacturers CD-R/RW disc ......................................... 123 SD memory card ..................................... 122 Recording Adjusting the input level automatically ..... 38 Maximum recording times ........................ 35 Overdubbing ...................................... 46, 49 Recording a Cassette or MD ......................
PAGE 127
Checking / Preparations ...MEMO... 午前１１時１６分水曜日 CD-2e_e.
PAGE 128
CD-2e_e.book 128 ページ２００７年１０月２４日 ...MEMO...
PAGE 129
CD-2e_e.book 129 ページ２００７年１０月２４日水曜日午前１１時１６分 Information Information EGYPT Al Fanny Trading Office 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-418-5531 REUNION SOUTH AFRICA Paul Bothner(PTY)Ltd. Royal Cape Park, Unit 24 Londonderry Road, Ottery 7800 Cape Town, SOUTH AFRICA TEL: (021) 799 4900 URUGUAY NORWAY JORDAN Zeelandia Music Center Inc. Orionweg 30 Curacao, Netherland Antilles TEL:(305)5926866 Todo Musica S.A. Francisco Acuna de Figueroa 1771 C.
PAGE 130
CD-2e_e.
PAGE 131
CD-2e_e.book 131 ページ２００７年１０月２４日水曜日午前１１時１６分 For EU Countries CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Apparatus containing Lithium batteries ADVARSEL! VARNING Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
PAGE 132
Cover4e.fm 132 ページ２００７年１０月３０日火曜日午前１１時２７分 Copyright ● Recording, duplication, distribution, sale, lease, performance, or broadcast of copyrighted material (musical works, visual works, broadcasts, live performances, etc.) belonging to a third party in part or in whole without the permission of the copyright owner is forbidden by law. ● This product can be used to record or duplicate audio material without being limited by certain technological copyprotection measures.