User`s manual

Part 2

Specifications

Interface specification

PNC-2300

Table size 305 mm x 230 mm (12" x 9")

Max. cutting area 305 mm (X) x 230 mm (Y) x 30 mm (Z) (12" (X) x 9" (Y) x 1.18" (Z))

Feed rate X, Y-axis : Max. 3600 mm (141") /min. Z-axis : Max. 1800 mm (70.8") /min.

Software resolution 0.01 mm (0.00394") /step or 0.025 mm (0.000984") /step (XY axis only)

Mechanical resolution X, Y-axis : 0.00125 mm (0.0000492") /step (micro-step control) Z-axis : 0.01 mm (0.00394") /step

Spindle motor 30 W (DC motor)

Revolution speed 5,000—15,000 rpm

Tool chuck Cutter holder and collet system

Interface Parallel (in compliance with the specification of Centronics)

Serial (under RS-232C standard)

Buffer size 1 KB (expandable up to 1 MB)

Instruction system CAMM-GL I (mode1, mode2)

Control keys MENU, ENTER/PAUSE, SPINDLE TEST ON/OFF, , , , , +Z, -Z,

SPINDLE CONTROL, EMERGENCY STOP switch

Source 1.4 A / 117 V 0.7 A / 220—230 V 0.7 A / 230—240 V

Acoustic noise level Cutting mode : 65 dB (A) or less Standby mode : 50 dB (A) or less

(According to ISO 7779)

External dimensions 592 mm (W) x 530 mm (D) x 357 mm (H) (23-5/16" (W) x 20-7/8" (D) x 14-1/16" (H))

When cover is open: 592 mm (W) x 555 mm (D) x 725 mm (H) (23-5/16" (W) x 21-7/8" (D) x 28-9/16" (H))

Weight 31 kg (68.3 lb.)

Operation temperature 5—40°C (41—104°F)

Operation humidity 35 %—80 % (no condensation)

Accessories Power cord: 1, Tool Holder (for f4.36 mm): 1, Collet (for f4.36 mm): 1,Wrenches (10 mm/21 mm): 2,

Character cutter (f3.175 mm): 1, * Tool Holder (for f3.175 mm): 1, * Collet (for f3.175 mm): 1,

* Depth regulator nose: 1, Hexagonal screw driver: 1, Spare tool securing screw: 1, Adhesive sheet: 1,

Clamps: 3, Vacuum adapter set: 1, Motor brushes : 2, CAMM-2 DRIVER for Windows 3.1: 1,

CAMM-2 DRIVER for Windows 95: 1, User's manual: 1 *..... Installed on the machine

[ Parallel ]

Standard In compliance with the specification of Centronics

Input signal STROBE (1BIT), DATA (8BIT)

Output signal BUSY (1BIT), ACK (1BIT)

I/O signal level TTL level

Transmission method Asynchronous

[ Serial ]

Standard RS-232C specification

Transmission method Asynchronous, duplex data transmission

Transmission speed 4800, 9600 (Selected using panel keys.)

Parity check Odd, Even, None (Selected using panel keys.)

Data bits 7 or 8 bits (Selected using panel keys.)

Stop bits 1 or 2 bits (Selected using panel keys.)