User`s manual

20
Part 2
Operating Each Function
Making Settings with the Liquid-crystal Display
Changing to Other-language Messages on the Liquid-crystal Display
When coordinate values are displayed:
Use the and keys to move along the X axis.
Use the and keys to move along the Y axis.
Use the and keys to move along the X axis.
Press the and
keys to move the blinking
cursor (“ ”) and select the
setting item.
Press the and
keys to change the value (or
selection choice), and then
press the key to confirm.
Press the key to
display the next menu.
The value (or selection
choice) enclosed in angled
brackets (“< >”) indicates
the current setting.
Use the and keys to move the blinking
cursor (“ ”) and select the execution item.
Press the key to execute.
Press the and keys
to move the blinking cursor (“ ”)
and select the setting item.
Press the key to confirm.
Press the and keys
to move the blinking cursor (“ ”)
and select the setting item.
Press the key to confirm.
Switch on the power while holding down the
[MENU] key.
1
Press the [ ] key to move the blinking cursor (“ ”) to
“Japanese,” and then press the [ENTER] key.
2
Messages on the display now appear in Japanese.
3
* To return the display to English-language messages,
carry out Step 1 again. When the language-selection
menu appears (similar to the one in Step 1, but in
Japanese), move the cursor to “
” and press the
[ENTER] key.
While pressing
the [MENU] key.
+
Turn the power on