User`s manual

18
Part 1
12. Finishing
After cutting has been finished, detach the cutter, remove the workpiece, and clean away chips.
• The tool blade can cause injury to the hand even when not in motion.
• Please use a vacuum cleaner to remove cutting dust. Do not use any blower like airbrush. Otherwise,
dust spread in the air may harm your health or damage this machine.
• After finishing, be sure to wash the hands with water to remove any adhering cutting chips.
Press the [MENU] key to make the following screen
appear on the display.
1
Press the arrow keys and the [+Z] key to move the
bed to a position where the cutter and material can
easily be detached.
2
Open the cover and detach the cutter.
3
Remove the workpiece.
4
Use a commercially available vacuum cleaner to
remove chips inside the box.
5
Head
If the material has been secured in place using an
adhesive sheet or double-sided tape, peel it off of the
bed.