User`s manual

Part 1

Cutting Condition Setting Examples

The chart below contains reference examples of the appropriate cutting conditions for several types of workpiece material. In the case

that the conditions are input using software or when constructing your own programs, set the cutting conditions with reference to the

chart. However, because conditions differ depending on cutter sharpness and workpiece hardness, cutting performance may not always

be optimal when adhering to the conditions specified below. In such a case, delicate adjustment should be performed at the time of actual

cutting.

Workpiece Cutter Spindle revolution Cutting-in amount XY axis feeding Z axis feeding

(Option) speed (RPM) (mm) speed (mm/sec.) speed (mm/sec.)

Acrylic resin ZEC-H4032 10000 0.2 15 5

ZHS-H4400 10000 0.2 15 5

Aluminum ZEC-U4032 12000 0.05 5 1

ZDC-D4000 Without rotation 0.1 10 1

Brass ZEC-U4032 12000 0.05 5 1

ZDC-D4000 Without rotation 0.1 10 1

Chemical wood ZEC-H4032 10000 0.4 30 10

ZHS-H4400 10000 0.5 30 5

Modeling wax ZEC-H4032 10000 0.5 30 10

(Option) ZHS-H4400 10000 0.8 30 5