User`s manual

5
Part 1
Connections
• Ensure that the power supply voltage is within ±10% of the machine's rated voltage.
• Connect the cables only when the PNC-2300 and the computer power sources are OFF.
• Connect the power supply cord and the computer-use input/output cable firmly so that they don't come loose or cause a poor
connection.
The cable for computer connection is optional. Please purchase the appropriate cable for the type of computer and software used.
Use either a parallel
cable or serial cable
to connect.
Left side
Right side
Power cord
Printer connector
on the computer
Parallel cable
(sold separately)
Lock-use pin
RS-232C connector
on the computer
Serial (RS-232C) cable
(sold separately)
Screw
Screw
Screw