User`s manual

4
Part 1
3. Installation and Connections
Installation
• Do not install the machine in a location where it may tip over, such as at the edge of a table.
• Two or more people are needed to take the PNC-2300 out of the carton. The machine weighs 31 kg
(68.3lb.).
The space shown in the figure below is required for installation.
• Use the PNC-2300 on a stable surface.
• Use within a temperature range of 5 to 40°C (41 to
104°F) and within a humidity range of 35 to 80%.
• To prevent accidents, do not install in any of the
following types of areas.
Avoid use in areas subject to strong electric noise.
Avoid use in areas subject to high humidity or
dust.
The PNC-2300 generates heat when used, and
should not be installed in an area with poor heat
radiation characteristics.
Do not install in an area subject to strong vibra-
tion.
Do not install in an area exposed to strong light
such as direct sunlight.