Owner`s manual

MaxMotion for Machines Chapter 5-91
Choosing Material
By choosing a material from the material menu, cutting parameters like
tool speed, cutter depth, tool size, material size, etc. are automatically
set.
Edit Materials
Edit materials allows you to set the parameters mentioned in choosing
material. Custom material settings can also be created.
Settings
Offset
The outline command is used for creating tool offsets to compensate for
the cutter diameter.
Fill
The fill command is used for creating route path to remove material
from inside a shape or shapes. Any inserted graphics or TrueType or
PostScript fonts need to be converted to paths. Once they are converted
to paths, they are simply shapes or contours to the MaxMotion soft-
ware. Tool offsets and fill commands can be applied to these shapes.
Default Settings
The default settings are used to set up the dimensional values (millime-
ters or inches), tool size values, and the time values (seconds or
minutes) for your work in MaxMotion.
Design Plate Size
Plate size can be easily changed in Auto Layout under job design menu.
However, you can change it from here too.
Bitmap Setting
This optional feature is used for scanned images of photographs.
Different settings are available to get proper output.
Graphics
Graphics operations like flip/rotate and scaling are possible only for the