Owner`s manual

MaxMotion for Machines Chapter 5-87
screen. The primary use of merge for an engraver is to create jobs with
multiple columns.
Save
This command will save the file. Make sure to understand where it
saved it.
Save As
This option allows you to make a new copy of the current file, saved
with a new name.
Import
MaxMotion can import three types of files, referred to as
PostScript(*.AI, *.PS, or *.EPS), CAD Files (*.DXF), and old
MaxMotion files. If you have files created by older versions of
MaxMotion (*.MAX),
Write Comments
Clicking on the Write Comments command, while a job is open, allows
you to view a previously saved comments for the open job or write new
comments for the new job.
Scan
Scan command allows the user to invoke the connected scanning and
vectorizing software like Adobe Streamline
Machine Setup
When clicked on the machine setup/plotter setup box, a list will be
displayed with the model numbers of all the machines supported. Select
the machine of your choice to which you will be working with. Virtual
Controller version will require for you to set more settings in each
sections.
Control Pad (Virtual Controller Only)
The standard 10-Key key-pad (Control Pad) on the keyboard is
functionally made available to control the X,Y,Z table.
Machine
This command will send the file to the machine for the output of
engraving/routing.