Owner`s manual

MaxMotion for Machines Chapter 3-79
(23) Pause the machine while in operation and continue or quit
(Virtual Controller only)
Step 1. While engraving is taking place, the computer screen shows
an hour glass.
Step 2. Depressing the Zero key on the 10-key keypad anytime will
pause the process of the job. The tool will be retracted and
the machine will wait for the next command.
Step 3. The operator has three choices:
A. Depress the Space Bar again and the operation will
resume.
B. Depress the ESC key and the job will be terminated.
The tool will travel back to the starting position for the
job.
C. Depress the A key and the job will be aborted. The tool
will not move at all.
HOME