Owner`s manual

MaxMotion for Machines Chapter 3-63
Step 6. Select magnifying glass from the Tool Pad and click on the
‘U’ character of the word ‘You.’ You will only see the
outline of the character and all proper blue dot positions.
Step 7. Click on the Settings menu and Select 0.010 inch fill tool.
Step 8. Remember that the sensitive part of the offset and the fill tools
is the lower most point of the tool. Make sure that the lower
tip of the tool is inside one of the selected shapes. For best
results, always apply offsets before filling the shapes. If it is
it will fill all the selected shapes. If not, everything will be
deselected. Now you will need to select them again.
Step 9. Enlarge with the magnifying glass to see the tool paths (fill
patterns) within the characters.