Owner`s manual

MaxMotion for Machines Chapter 3-59
( 9) Create and use Batch/Matrix operations without a Variable
List (Virtual Controller and HPGL)
This can be a useful procedure when you need to step and repeat
multiple copies of the same job.
Step 1. Go to JobDesign menu and create your job with plate size,
graphics, and text for multiple copies.
Step 2. Click on the Job Design Menu and Select ‘Matrix
Settings’.
Step 3. Declare the size of the material. It must be larger than the
plate size or job size for the operator to perform matrix
operations.
Step 4. Select column or row as a preference for the machine to
engrave.
Step 5. Select text condense preference: condense width only or
condense height and width proportionally, if and when
necessary.
Step 6. Select None if you want no scoring. Select length of partial
score if you want partial scoring. Select depth of complete
score if you want complete scoring.
Step 7. Click ‘Save’.