Owner`s manual

58 MaxMotion for Machines
Step 8. Click on the Job Design menu and Select ‘Batch/Matrix
output’. Batch/Matrix Output dialog box shows up. It will
show you the material size you entered in the Matrix settings
dialog box. It will also show you your plate size. It will
declare the total number of plates in this job. It will show all
of the selections that you just made in the Matrix settings
dialog box. The From Plate... to Plate... numbers will tell you
how many of the total number of plates will fit on your
declared material size.
Step 9. Click ‘Send’ to start engraving.
Step10. The ‘send’ button will change to ‘score’ button and wait
for your command before scoring. This pause will give you
a chance to change the tool or adjust the depth for scoring.
Step11. If you plan to use precut stock and engrave in a batch fashion
instead of a large material size and engrave in a matrix
fashion, click Same as Plate box in the Batch/Matrix Output
dialog box. Now, MaxMotion will send out one plate at a time
and will pause and wait for the operator to exchange the
material on the table and click ‘send’ again.