Owner`s manual

MaxMotion for Machines Chapter 3-39
Chapter 3:
A Quick Start
Machine Set-Up:
( 1) Set MaxMotion software for
your particular XYZ table ................................ Chapter 3- 41
( 2) Use Control Pad ............................................... Chapter 3- 42
( 3) Adjust the setting for the surface and
get ready for the job ...........................................Chapter 3- 44
( 4) Set limit switches and set home position .......... Chapter 3- 45
Layout & Design:
( 5) Layout a simple job with or without
auto layout ........................................................Chapter 3- 49
( 6) Create a multi line badge in Auto Layout ........ Chapter 3- 52
( 7) Create and use a Variable List .......................... Chapter 3- 54
( 8) Create and use Batch/Matrix operations with a
Variable List .................................................... Chapter 3- 57
( 9) Create and use Batch/Matrix operations without a
variable list ....................................................... Chapter 3- 59
(10) Import clip art, logos, and designs
from Corel Draw ............................................. Chapter 3- 61
(11) Continue the previous job to fill large
TrueType fonts ................................................ Chapter 3- 62
(12) Create mirror image and rotate graphic files ...Chapter 3- 64
(13) Select text for kerning and editing ...................Chapter 3- 65
(14) Move lines and objects only in horizontal or
vertical directions ............................................. Chapter 3- 66
(15) How can you change default settings?.............. Chapter 3- 67
(16) What are the short cuts for magnifying glass? ..Chapter 3- 68
(17) Lowdown on the Materials menu...................... Chapter 3- 69
(18) Positive and negative Engraving ..................... Chapter 3- 70
(19) Positive and negative Arc creation ................. .Chapter 3- 73