Owner`s manual

MaxMotion for Machines Appendix E-229
Appendix E
Hardware Installations
HARDWARE INSTALLATION INSTRUCTIONS
E1. Installation instructions for MaxAmp Driver box
We thank you for purchasing our revolutionary no controller solution
that is gaining popularity throughout the marketplace. You are going to
enjoy the following advantages:
(1) Completely open architecture where you depend upon nobody to
maintain your machine.
(2) Future upgrades will simply mean installing new software without
any hardware changes.
(3) Future purchase would simply mean buying a used or a new X,Y,Z
table at an attractive rate and increasing your capacity.
Important: The following upgrade procedure should be followed and
performed only by experienced and trained individuals who under-
stands these machines. It is important to follow safety procedures
necessary for any such upgrade work. You should not attempt to carry
out these upgrade procedures, if you do not possess proper knowledge
of such systems and the required safety procedures. The safety knowl-
edge may require understanding of the electric hazards, hazards posed
by sharp tools used to work on harder materials, mechanical complex-
ity, etc. The safety knowledge may require use of gloves, goggles, hard
hat, and other protection devices. Solustan is not responsible for any
damages because of the installation of our upgrade kit.
INSTALLATION
A. The MaxAmp unit is designed to work with different tables
and different motors. Yours should be available with proper
matching amplifiers for the motors on your table and
appropriate connectors for connecting both to the computer as
well as to the table.