Owner`s manual

222 MaxMotion for Machines
the top center on the X axis and 0.5 inches away from the working area
on the Y axis.
When you start a new job with a new plate size and proper positioning
of the plate, the software will add the offset values to create a reference
value of top center and will engrave the job on the plate. At the end of
the job, it will not go to Top Center but it will directly retire to the
parking position and will get out of your way.
Please, understand the definitions of starting position, parking position,
start offsets. Practice by applying offsets and watch the results using
waste material and using a broken tool or no tool to minimize your
damage while you get the hang of it.