Owner`s manual

150 MaxMotion for Machines
■ Material size will be same as plate size for batch output.
■ Material size will be larger than plate size for matrix output.
■ Decide whether you want to engrave in the column or row format.
■ MaxMotion will automatically condense the line that exceeds the
available width. The operator selects whether the characters are
condensed proportionally (heights and width both) or are condensed
along the width while keeping the same height. The operator will
choose the left and right margins allowed for the plate.
■ Elaborate scoring capabilities are provided. The operator may choose
no scoring to partial scoring to complete scoring. Partial scoring will be
done in the four corners only for the desired length.
■ Scoring depth can be different than the engraving of the job and can
be called out separately.
MaxMotion will first complete the job of engraving, including all the
plates for the material. It will pause at this point for tool change,
adjustment, and depth adjustment, if necessary. Operator will click the
SEND key again for scoring operation to start.
In Batch/Matrix output, Esc also halts the operation after PAUSE, the
only difference being Esc goes to the beginning of the unfinished job
before stopping.