Owner`s manual

148 MaxMotion for Machines
The Next button will replace the current Line One and Line Three with
the next two lines on the list. The Previous button will bring in the
previous two lines.
The variable text lines can be one or many in a job and it depends upon
the selection of lines as well as the sequence in which you select the
lines.
The Close button will close the Import List dialog box.
Matrix Settings (F11)
Once you import a list of the variable parameters, you may want to
create either a batch output or matrix output. The concept goes some-
thing like this:
A number of jobs are to be prepared for a customer. All the jobs are
similar in size and looks. A part of the job is the same in every case
such as, logo and name of the company. However, the other part of the
job is variable such as, names and titles of office holders.
In the batch mode, the individual physical plate sizes are cut and
prepared ahead of time. In this case, the size of the plate and the size of
the material should be declared as the same. As a result, the software
will process one plate at a time and wait for the operator to click the
SEND key in the Batch/Matrix output mode or depress the RETURN