Owner`s manual

MaxMotion for Machines Chapter 9-147
click Open button at this point, MaxMotion will launch standard
Windows accessory called Note Pad or the editor NoteTabPro and will
show the selected text file. You can make changes and corrections at
this point, if desired. Once you are satisfied that is the file you are
interested in, pull down the File menu and Exit the editor in use.
If you click the New button, MaxMotion will open the same Note Pad
accessory or the editor NoteTabPro with a blank page. You can create a
text list at this point for your engraving job and save it for later use.
Every line of the text shall end with a carriage return (depressing Enter
or Return key will do the trick). MaxMotion uses carriage return
character to define the end of a line. As soon as you click on First,
MaxMotion will look into the selected file, find the first line and paste
it in place of Line One and find second line and paste it in place of Line
Three. The font, size, and justification will be preserved. If everything
looks OK, this job is ready to go to the engraving machine.