Owner`s manual

MaxMotion for Machines Chapter 9-137
2. Move line positions at will and create a new order. Open the Auto
Layout dialog box and click CREATE again to relayout the job.
Everything will be recalculated.
3. Drag any part of the job anywhere on the plate for a free form
design, if wanted.
4. Convert to paths, offset, and fill any logo, graphic, or TrueType
fonts.
5. Use Edit Layout to relayout the job line by line.
6. There is one clever design for the single line, small jobs. Anytime
you select a one line in the Auto Layout, the line will be centered
automatically as long as the top and bottom offset values are identical.
7. Use the software in the free layout mode without actually
creating auto layout lines. Simply enter the number of lines as 0 and
click create. You will be in the free layout mode. Click the text tool
inside the design plate and start entering text line by line.
8. Create arcs and slant lines.
The following function keys are assigned to speed up the work for a
power user. Please, note and become familiar with the keys:
F1 - Help
F2 - Font
F3 - Auto Layout
F4 - Edit Layout
F5 - Launch a selected Text Editor and copy the contents of the
MaxMotion screen in it
F6 - Read Text file back to MaxMotion screen, once Saved in the editor
F7 - Insert Graphics
F8 - View Paths (a toggle)
F9 - Convert to Paths
F10 - Import List
F11 - Matrix Settings
F12 - Batch / Matrix Output
Ctrl+R - Edit Material