Owner`s manual

134 MaxMotion for Machines
like it.
Pull down the Job Design menu and click select Auto Layout.
Select the following:
1. Select the plate size by selecting the height and width of the plate.
This can be changed at any time during the process of job design.
2. The user may have an idea of approximate or exact number of lines
that they need to compose the job. Enter the number in the number of
lines box. This number can be changed at any time during the process
of the job design.
3. The default selection of the line heights is in inches or millimeters.
Select the height of each of the lines individually or enter the value of
the height for the first line and click Set All Sizes, if you want all the
lines to be the same height. If you are creating a layout with a number
of lines with the same height but it is different from the default value,
either you need to enter the same value as many times as the number of
lines or you can go to font dialogue, change current size and then, come
back to Auto Layout. Changing current font size will not change the
existing lines. This can be time consuming and annoying. Press the
‘Set All Size’ button and sizes of all the lines will change to the one
shown presently in the size box.