Owner`s manual

MaxMotion for Machines Chapter 9-129
lines or
(b) The width factors of the lines are set from the line the
MaxMotion finds first (usually the first line) in case no line is
selected.
All the lines in case of All Lines selection or similar lines in case of
Similar Lines selection will have the same percent condense or expan-
sion percent. If one line condenses or expands due to addition or
deletion of a character or due to a change in the width factor, appropri-
ate lines will change similarly.
Identical capabilities of width and condense percent are set up in the
Edit Layout dialog box for the user’s convenience.
The feature to control the character spacing works in the following
manner:
In the font dialog box you can edit ‘Extra Space’. 0% means normal
space designed for the font by the font manufacturer, a 100% means
gap equaling an average character space and so on. If text is selected
while entering font dialog, ‘extra space’ will be for the selected text,
otherwise this will be general setting for the new lines. Once a line is
begun, it is not affected by the change in the general setting, each line
can have its own setting. When a setting is changed, it is good for new
text entry only and will not affect the existing text on the screen.
Clicking ‘Select as Default’ button will save this in the .INI file (item