Owner`s manual

124 MaxMotion for Machines
mines whether a prior offset command was already issued on the
selected shapes. If an offset was already present on the shape,
MaxMotion will respect the offset value, keep it, and simply will go on
to fill the shape with the tool of selection.
On the other hand, if MaxMotion determines that no prior offset
command was issued on the selected shapes, it will apply an offset on
the shape of the same value as fill tool before filling the shape. User is
cautioned to apply small offsets in case of small shapes with narrow
“necks” (an example is a TrueType font like Times Roman) before
filling the shapes.
If more than one shape is selected when the fill tool is used, fill will be
created for all the selected shapes. If you wish to remove the fill from
any shape, hold down the Shift key with the fill tool selected.
Clicking within any shape with fill will now erase fill of any
selected shapes.