User Manual
Table Of Contents
- USING THE UNIT SAFELY
 - Important notes
 - 1. The AXSynth in a nutshell
 - 2. Panel descriptions
 - 3. Making connections
 - 4. Playing the AXSynth
 - 5. Using the AXSynth’s performance functions
 - 6. Editing Tone settings
 - 7. Using the AXSynth as MIDI controller
 - 8. Using the AXSynth’s USB port
 - 9. About V-LINK
 - 10. Additional functions
 - 11. Appendix
 - 12. Specifications
 - 13. MIDI implementation chart
 - 14. Index
 
r
 AX-Synth Owner’s Manual
5
ENGLISH ENGLISH
ENGLISH ENGLISH ENGLISH
ENGLISH
• Batteries must never be heated, taken apart, or thrown 
into fire or water.
• DO NOT play a CD-ROM disc on a conventional audio CD 
player. The resulting sound may be of a level that could 
cause permanent hearing loss. Damage to speakers or 
other system components may result.
• Never expose Ni-MH batteries to excessive heat such as 
sunshine, fire or the like.
• The AX-Synth and the AC adaptor should be located so 
that their location or position does not interfere with its 
proper ventilation.
•Always grasp only the plug on the AC adaptor cord when 
plugging into, or unplugging from, an outlet or this unit.
• At regular intervals, you should unplug the AC adaptor 
and clean it by using a dry cloth to wipe all dust and other 
accumulations away from its prongs. Also, disconnect the 
power plug from the power outlet whenever the unit is to remain 
unused for an extended period of time. Any accumulation of dust 
between the power plug and the power outlet can result in poor 
insulation and lead to fire.
• Try to prevent cords and cables from becoming entangled. 
Also, all cords and cables should be placed so they are out 
of the reach of children.
• Never climb on top of, nor place heavy objects on the 
AX-Synth.
• Never handle the AC adaptor or its plugs with wet hands 
when plugging into, or unplugging from, an outlet or this 
unit.
• Before moving the AX-Synth, disconnect the AC adaptor 
and all cords coming from external devices. 
• Before cleaning the unit, turn off the power and unplug 
the AC adaptor from the outlet (see p. 13).
•Whenever you suspect the possibility of lightning in your 
area, disconnect the AC adaptor from the outlet.
• If used improperly, batteries may explode or leak and 
cause damage or injury. In the interest of safety, please 
read and observe the following precautions.
• Carefully follow the installation instructions for batter-
ies, and make sure you observe the correct polarity.
• Avoid using new batteries together with used ones. In 
addition, avoid mixing different types of batteries.
• Remove the batteries whenever the unit is to remain 
unused for an extended period of time.
• If a battery has leaked, use a soft piece of cloth or paper towel 
to wipe all remnants of the discharge from the battery com-
partment. Then install new batteries. To avoid inflammation of 
the skin, make sure that none of the battery discharge gets onto 
your hands or skin. Exercise the utmost caution so that none of 
the discharge gets near your eyes. Immediately rinse the 
affected area with running water if any of the discharge has 
entered the eyes.
• Never keep batteries together with metallic objects such as ball-
point pens, necklaces, hairpins, etc.
• Used batteries must be disposed of in compliance with 
whatever regulations for their safe disposal that may be 
observed in the region in which you live.
AX-Synth_e2 Page 5 Friday, May 22, 2009 4:38 PM










