Electronic Keyboard User Manual

275
Troubleshooting
Troubleshooting
Appendices
Pressing the expression pedal
while playing back ATELIER
performance data produces a
crackling noise
The expression pedal function is set to
“PEDAL+COMPOSER” during
playback of ATELIER performance
data.
When this setting is used, moving the
expression pedal while playing back
ATELIER performance data may create
a difference between the expression
pedal information in the performance
data and the volume as set with the
expression pedal, which can result in
this kind of sound being produced.
Set the expression pedal function to
“PEDAL” during playback.
p. 212
Tempo not changing even when
the source tempo is reselected
(when arranging rhythms using
the Rhythm Customize function)
Auto Std Tempo (Auto Standard
Tempo) is set to on.
When the Auto Std Tempo setting is set
to ON and rhythms are switched while
the rhythm is stopped, the tempo is
automatically set to the tempo for that
rhythm.
The tempo setting does not change
automatically, even if the rhythms are
switched with the Auto Std Tempo
setting set to OFF and the rhythm
stopped.
Turn “Auto Std Tempo” off.
p. 215
Unable to save created rhythm to
the User Memory
“Memory Full” appears in the display.
The available memory remaining in the
ATELIER is not sufficient.
First delete some other rhythm saved to
the user memory, then save the rhythm
you have created to the user memory
once again.
p. 207
p. 208
There is no sound from the twelve
keys at the right of the lower
keyboard
The V-LINK function is set Mode 2.
When V-LINK setting is Mode 2, the
group of twelve keys starting at the
very right of the lower keyboard are
used for controlling video images.
Therefore, no sounds are played even
when you press these keys.
Turn the V-LINK function off, or select
Mode 1 for the V-LINK function.
p. 227
DVD volume is too low (or
inaudible)
Is the DVD player connected correctly?
Connect the DVD player correctly.
p. 258
Could the DVD PLAYER INPUT
[VOLUME] knob be turned to the
minimum position?
The DVD player’s volume is adjusted
with the DVD PLAYER INPUT
[VOLUME] knob; not by the [VOLUME]
knob.
p. 258
Problem Check Solution Page
AT-900_e.book 275 ページ ２００７年９月７日 金曜日 午前８時４３分