Owner`s manual

AR-200S RS-232C Reference -

> ST Output at Finish of Playback

Function: Output at Finish of Playback

Syntax: stxST: a;

a The number showing the channel which playback finished.

0 When Dual Mono mode is OFF

1 L Channel when Dual Mono mode is ON

2 R Channel when Dual Mono mode is ON

Note: Output when playback of phrases is finished and the AR is not playing any

phrase.

4.4.3 Reply Commands

= ACK Acknowledge Normal Status, Indicate Normal Reception of a Command

Function: Acknowledge normal status, indicate normal reception of a command

Syntax: ACK (06H)

= ER Replies When an Error Has Occurred

Function: Replies when an error has occurred.

Syntax: stxER: a;

a Error number

0 Syntax error

This error occurs when correct reception was not possible, such as when the

syntax of the command was incorrect or inappropriate.

1 The specified phrase does not exist, or the phrase number is incorrect. This

error will also be output if a phrase number is specified for a card which is not

inserted.

2 Busy error.

The AR-200S is currently recording, playing back or record-ready. When the

AR-200S is recording, playing back or record-ready, it will process only the

following commands.

Control commands Request commands

During Recording PA , ST AC

During Play PA , ST , PE AC

During Play Pause PA , ST , PE , RL AC

During

Recording-ready

RE, ST AC