Owner`s manual

AR-200S RS-232C Reference -

System Settings

= AC Active Sensing Reply

Function: Active sensing reply

Syntax: stxAC: a, b;

a Status of AR-200S

0 During playback

1 During recording

2 During recording pause

3 During playback pause

b Phrase number

Note: During Dual Mono Mode, this is output twice.

refer to the 4.2.4 AC command

= CE Program (Count) Playback Setting Output

Function: Program (Count) Playback setting output

Syntax: stxCE: a, b, c, c, .... , c;

a Reserved (0)

b Program Playback patterns ( 1 - 5 )

c Phrase number to be played back (up to 100 phrases)

Note: refer to UQ command

= CR Card Remaining Capacity Output

Function: Card remaining capacity output

Syntax: stxCR: a, b;

a Remaining capacity of card A

b Remaining capacity of card B

Note: unit: byte. refer to MQ command

If the card is in AR-2000 format, AR output '0' for remaining capacity.

= DP Direct Playback Setting Output

Function: Direct Playback setting output

Syntax: stxDP: a, b, c, .... , j;

a Reserved (0)

b - j Phrase number which you assigned to control input pin

b CH1

c CH2

| |

j CH9

Note: For unused direct channels, “----” is output. “PLAY” will be output for the direct

channel which plays back the phrase shown in the display.

(--> refer to DQ command)