Owner`s manual

AR-200S RS-232C Reference -

= Xon (11H)/Xoff (13H) Allow or Disable Transmission. Used for Handshaking

Function: Allow or disable transmission. Used for handshaking.

Syntax: Xon is 11H only (transmission permitted)

Xoff is 13H only (transmission disabled)

4.3 Commands Sent from the AR-200S to the External Device (Computer)

The following two types of commands are sent from the AR-200S to an external device. In this

explanation, “external device” refers to the computer. “AR” refers to the AR-200S.

1) Setting output commands

These commands output the current setting status of the AR-200S. They are output in response

to a request command from the external device.

2) Reply commands

Reply commands are necessary for communication control, such as acknowledgment that a

command was correctly received, etc.

4.4 Details of Commands Sent from the AR-200S to the External Device (Computer)

4.4.1 Setting Output Commands

= CS Card Setting Output

Function: Card setting output

Syntax: stxCS: a,“b”, c, d, e, f, g;

a Reserved (0)

b Card name (8 characters)

c Reserved

d Reserved

e Maximum number of phrase

0 (250)

1 (500)

2 (1000)

f Card ID (Created automatically)

g Reserved

Note: refer to CQ command

Phrase Settings

< PU Pattern Phrase Setting Output

Function: Pattern Phrase setting output

Syntax: stxPU: a, b, c, d, .... , c, d;

a Pattern Phrase number

b Pattern Phrase Playback mode

0 (Sequence)

1 (Random)

c Phrase number to be played back(A1-A1000,B1-B1000)

d Delay Time (00S0 - 59S9)

Note: refer to 2Q command