Owner`s manual

R
AR-200S RS-232C Reference - 21
< SM System Settings
Function: System settings
Syntax: stxSM: a, b, c, d, e, f;
a Reserved (0)
b Line Input select
0 Mute : Line Thru ON , Volume 0%
1 Mix : Line Thru ON , Volume 100%
2 OFF : Line Thru OFF
c Channel Playback (Dual Mono mode)
0 OFF
1 ON
d Control Input select
0 Normal playback : for Direct Playback
1 Last-In playback : for Direct Playback
2 Sequence playback : for Direct Playback
3 Program(Count) playback
4 Binary playback
e Binary Playback Input Trigger
0 Level: Level On , Edge Off
1 Edge: Level Off , Edge On
f Busy Output
0 All On: Delay Time On , Phrase Playback On , Repeat Interval On
1 Delay On: Delay Time On , Phrase Playback On , Repeat Interval Off
2 Repeat On: Delay Time Off , Phrase Playback On , Repeat Interval On
3 All Off: Delay Time Off , Phrase Playback On , Repeat Interval Off
Example) stxSM:0,0,0,0,1,0;
System settings will be made for Line Input select “MUTE”, Channel Playback
“OFF”, Control Input select “Normal playback”, Binary Playback Input Trigger
Mode “Edge”, and Busy Output “All On.”
Note: Use LS to protect a recorded phrase.
Caution System data will not be written to card .
> CI Control Input Mode Settings
Function: Control Input Mode setting
Syntax: stxCI: a, b, c, .... , q;
a Reserved (0)
b Control Input Mode
0 Direct Play
1 Program(Count Play)
2 Binary Play
3 Binary REC
c Direct Playback Method
0 Normal
1 First In
2 Last In
3 Sequence
d Binary Playback Trigger Settings
Level
0 Off
1 On
e Binary Playback Trigger Settings
Edge
0 Off
1 On
f The Method used for specifying the
phrase ( Binary Recording )
0 Binary 1
1 Binary 2
Caution Control Input Mode data will not be written to card.