Owner`s manual

AR-200S RS-232C Reference -

> PP Playback Point Settings

Function: Playback Point settings

Syntax: stxPP: a, b, c;

a Phrase number

b Start (0H0M0S0F0S - 23H59M59S**F9S)

c End (0H0M0S0F0S - 23H59M59S**F9S)

Note: The number of digits for **F (frame) increases according to the value of MTC

type.

Caution The AR-200S cannot respond to this command during crossfades, repeats, or

intervals.

> LP Loop Play Settings

Function: Loop Play settings

Syntax: stxLP: a, b, c, d, e;

a Phrase number

b Loop Play

0 OFF

1 ON

c The number of loops

0 ENDLESS

1 1

| |

99 99

d Loop 1 position (0H0M0S0F0S - 23H59M59S**F9S)

e Loop 2 position (0H0M0S0F0S - 23H59M59S**F9S)

Note: The number of digits for **F (frame) increases according to the value of MTC

type.

Caution The command is not compatible with pattern phrases and song phrases.

The command is not compatible with audio phrases recorded in Mode 2.

> PY Delay Time Settings

Function: Delay Time settings

Syntax: stxPY: a, b;

a Phrase number

b Delay Time (0S0F - 59S**F)

Note: The number of digits for **F (frame) increases according to the value of MTC

type.

> VM Play Volume Settings

Function: play Volume settings

Syntax: stxVM: a, b;

a Phrase number

b Play Volume %(10 - 100)