Owner`s manual

AR-200S RS-232C Reference -

Caution For the pattern phrase number, specify a phrase number where nothing is recorded.

For the playback phrase number, Audio phrases, MIDI phrases, and pattern

phrases can be specified.

> PS (Pattern phrase Set up for AR-3000/200S)

Function: Pattern Phrase settings

Syntax_1: (Sequence or Random 1)

stxPS: a, b, c, d, e, f, g, .... , d, e, f, g;

a Pattern Phrase number

b Pattern Phrase Playback mode

0 Sequence

1 Random 1

c Researved (0)

d Playback Sequence

e Phrase number to be played back

f Playback Volume (10 – 100 : 10% - 100% )

g Delay Time (0S0 - 59S9)

Syntax_2: (Random 2 or Random 3)

stxPS: a, b, c, d, e, f, g, .... , d, e, f, g;

a Pattern Phrase number

b Pattern Phrase Playback mode

2 Random 2

3 Random 3

c Interrupt phrase interval ( 1 – 25 )

d Playback Sequence( 1 – 100 : phrases , 101 – 128 : interrupt phrases )

e Phrase number to be played back

f Playback Volume ( 10 – 100 : 10% - 100% )

g Delay Time (0S0 - 59S9)

* On specification, delay time cannot be set for interrupt phrase. Please send one value of

0S0-59S9.

Note: A maximum of 128 phrases can be specified in one line.

Caution For the pattern phrase number, specify a phrase number where nothing is recorded.

For the playback phrase number, Audio phrases, MIDI phrases, and pattern

phrases can be specified.

> SS Song Phrase Settings

Function: Song Phrase settings

Syntax: stxSS: a, b, c, .... , b, c;

a Song Phrase number

b Phrase number to be played back / STOP ( To specify the ending point )

c Start point of phrase / End point of song phrase

Note: A maximum of 100 phrases can be specified in one line.

The number of digits for **F (frame) increases according to the value of MTC

type.

Caution For the song phrase number, specify a phrase number where nothing is recorded.

For the playback phrase number, Audio phrases can be specified.

The number of digits for **F (frame) increases according to the value of MTC type.