Owner`s manual

AR-200S RS-232C Reference -

Recording Commands

= AE Starting Time-Stamped Recording

Function: Starting Time-stamped Recording

Syntax: stxAE: a, b, c, d, e, f, g, h, i;

a year ( 1998 – 2050 )

b month ( 1 – 12 )

c day ( 1 – 31 )

d hour ( 0 – 23 )

e minutes ( 0 – 59 )

f second ( 0 – 59 )

g RDAC-Grade

0 Announce

1 Long 2

2 Long 1

3 Standard

4 High

5 S-High

h RDAC-Mode

0 Linear

1 Mode 1

2 Mode 2

3 Mode 3

4 H – Linear

i Recording Type

0 Mono

1 Stereo

Example) stxAE:2006,3,1,8,59,0,0,1,0;

Add a time stamp for “2006” “March” “1” “8:59:00” and start recording with

“Announce” “Mode1” “Mono.”

Note: The time information given in the command can be stored in the recorded

phrase as a time stamp.

The AR-200S starts recording immediately when it receives an AE command.

However, When you have made the trigger recording setting, the waits for audio

input higher than the trigger level (the volume level at which recording

starts), then starts recording. (It is not necessary to send an RE command.

Levels in trigger recording settings may change depending on the immediately

preceding recording action and the card settings.）

The phrase number is automatically assigned to a free number where nothing is recorded.

Use the ST command to stop recording.

Also, the AR-200S automatically returns the total number of phrases recorded

on the card when it receives an AE command. (Refer to AE command 4 . 4 . 1 )